Overview
The Rigid Industries bumper mount kit, model 46512, mounts one 30 in. Rigid SR-Series or SR2-Series light on a bumper. It is a Direct Fit kit, and lights are not included.
Key features
- Mounts one Rigid 30 in. SR-Series or SR2-Series light
- Bumper mount kit design
- Direct Fit kit
- Lights are not included with the kit
Choosing a bumper and light
A bumper mount carries a light on the front of the vehicle, where it takes the same road spray, stones and vibration as the bumper itself. Before fitting, look at how the bracket clamps or bolts to the bumper and whether the bumper has enough flat, rigid area to carry a light and its wiring. Thin steel or aftermarket plastic skins may need reinforcement or a different mounting point.
Light position matters as much as the bracket. Set the light so its beam sits where you need it, and keep it clear of the grille, winch line and radiator airflow. Route the wiring away from moving parts and use a fused, switched power feed. After the first few trail runs, re-check the bolts and look for cracked welds or stress marks around the mounting points.
- Check bumper material and flat mounting area
- Confirm light position clears the grille and winch
- Use a fuse and switch on the power feed
- Re-check mounting bolts after the first trail runs
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 46512 |
| UPC | 849774007897 |
| Light compatibility | Rigid 30 in. SR-Series or SR2-Series |
| Lights included | No |
| Fitment | Direct Fit |
Vehicle fitment
No vehicle years, makes or models are named for this bumper mount. Confirm fit for your bumper and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a bumper mount. Not included: Rigid 30 in. SR-Series or SR2-Series lights.












