Overview
The N-Fab LBM Bumper Mount in textured black, part number T4R1430CB, is a bumper-mounted bracket that holds one 30 inch LED light bar behind the grille of the 2014–2018 Toyota 4Runner. It suits owners who want a front light bar mounted to the bumper rather than on the roof.
The brackets are built from .084 wall steel in an all-welded, one-piece construction. Each part is zinc coated for corrosion protection before a thick high-gloss powder coat is applied. The bolt-on mount places the light bar behind the grille, which gives a clean look and some theft protection.
Key features
- One-piece, all-welded construction from .084 wall steel, which N-Fab calls heavier gauge
- Zinc coated before finishing for corrosion protection
- Thick high-gloss powder-coat finish over a textured black base
- Bolt-on design that N-Fab describes as not flexing
- Mounts one 30 inch LED light bar behind the grille
- Compatible with most brands of LED lights
- Made in the USA
- Lifetime warranty on the product and a 5-year warranty on the finish
Bumper mount and grille clearance
A bumper mount places the light bar lower and closer to the road than a roof mount, which helps pick out the shoulder and the edge of the trail. Bumper-mounted bars also sit within the reach of stones and brush, so mount height and the bar’s position should be chosen with that in mind. Check that the bar clears the grille and any radiator-area components before tightening the bolts.
Heavier bars add weight to the front of the vehicle, which can change how the front suspension and steering respond. Inspect bolts and welds after rough trail use, and touch up any chipped powder coat before rust can form. Route the wiring through a fused relay, and keep the harness away from engine bay heat and moving parts so the insulation holds up over time.
- Confirm grille and radiator clearance
- Check bumper bolts after rough trail use
- Touch up chips to protect the steel
Specifications
| Brand | Nfab |
|---|---|
| Part number | T4R1430CB |
| UPC | 700008504861 |
| Material | Steel, .084 wall |
| Construction | All-welded, one-piece |
| Coating | Zinc coat under thick high-gloss powder coat |
| Finish | Textured black |
| Light capacity | One 30 inch LED light bar |
| Mount location | Behind the grille, bumper mounted |
| Type | Brackets only |
| Quantity | Pair |
| Warranty | Lifetime on product; 5-year on finish |
| Fitment | Direct fit, 2014–2018 Toyota 4Runner |
Vehicle fitment
The fit covers the 2014–2018 Toyota 4Runner in the SR5, TRD Off-Road, TRD Pro and Trail trims as a direct fit.
4Runner model years before 2014 and from 2019 onward are not covered, and other Toyota models and non-Toyota trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount bolts on, so no welding is needed. Light bars draw current when switched on, so route the power through a fused relay circuit. Plan the wire route from the grille area to the switch before fitting the light bar, and check local rules before running auxiliary lights on public roads.
What’s included
A pair of textured black brackets, supplied as brackets only.
Not included: LED light bars are separate from the mount.








