Overview
The Rigid Industries Reflect 64011 is a black LED light with a fully adjustable side mirror built into the same fixture. It was first developed for UTV and powersports applications and works well for many off-road uses. It is universal fit, so check how it clamps to your own vehicle before mounting.
The lamp and the mirror aim independently, which lets you point the light for the road ahead while setting the mirror for what is behind. Rigid says its patented LED technology and new Side-Shooter optics give a wide beam for cornering and drifting. Built-in amber LEDs on the outside edge add signaling functions.
Key features
- Fully adjustable side mirror in the same fixture as the LED light
- Lamp and mirror can be aimed independently
- Side-Shooter optics for a wide beam used in cornering
- Amber LEDs on the outer edge for turn signals, flashers or auxiliary running lights
- Tube mounting clamps included
- Patented LED technology.
- Black finish
Mirror use and sightlines
A side mirror that also carries a light has to be judged by what it shows you. Set the mirror first with the vehicle parked, then adjust the lamp separately so its beam does not wash out the mirror face. The mirror’s usefulness depends on its angle, so reset it after the vehicle is loaded or after the mount has been bumped.
Tube clamps grip a mounting tube, so the fit depends on tube diameter and how firmly the clamp is tightened. Protect the finish under the clamp with a thin layer of grease or a rubber pad if the tube is painted. Recheck clamp tightness after a few trips, especially on rough trails where tubes can flex.
- Set the mirror with the vehicle parked
- Check clamp tightness after rough trails
- Keep the lens clean for clear reflections
- Avoid mounting in the path of brush or branches
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 64011 |
| Finish | Black |
| Light type | LED light with fully adjustable side mirror |
| Optics | Side-Shooter |
| Amber LEDs | Built-in on the outside edge |
| Mounting | Tube mounting clamps, included |
| Original application | UTV and powersports |
Vehicle fitment
It is universal fit, so it is not built for one vehicle, year or model. Because it is a mirror as well as a light, check that the tube clamps suit your mounting tube and that the mirror sightline works on your vehicle.
Its original application was UTV and powersports vehicles, and it is not limited to them.
Installation notes
Mount it with the included tube clamps, then aim the lamp and the mirror separately. The amber LEDs can serve as turn signals or flashers, so wire them to the circuit you plan to use through a fused relay. Check local rules for mirrors and auxiliary lighting on public roads.
What’s included
Tube mounting clamps are included. Check the wiring and switch you need before installing.




















