Overview
The 10 inch Adapt LED light bar, part number 210413, is a single LED bar with eight selectable beam patterns. Its settings run from a wide 90 degree beam at close range to a narrow 15 degree spot for distance, all in one fixture. The Adapt range runs from 10-inch to 50-inch lengths, and this is the 10 inch version. It is a universal fit bar.
Rigid built the Adapt around LED technology and new patented optics, so the bar has no moving parts to shift the beam. Active View Technology changes the pattern automatically as the vehicle’s speed changes. A built-in accent light can be set to any color in the spectrum, including white, for a custom look around town, and base mounting is offered as well as side mounts.
Key features
- Eight selectable beam patterns, running from a 90 degree broad beam to a 15 degree long-distance spot.
- Active View Technology adjusts the beam as vehicle speed changes.
- No moving parts; the beam is shaped by LED technology and new optics.
- Built-in accent lighting in any color of the spectrum, including white.
- Base-mount option in addition to traditional side mounts.
- Backlit, molded dash unit controls patterns, Adaptive Mode, accent colors and presets.
- Includes an Under Dash Module and wiring harness.
Using the dash controller
The Adapt bar is driven by its dash controller, so the controller location matters as much as the light position. Choose a spot within easy reach that does not block airbags, pedals or the view ahead. Plan the cable path from the controller to the bar before drilling any holes, and keep it away from hot components and sharp edges.
Patterns that suit one type of driving may not suit another, so spend time testing settings on different surfaces and speeds. A backlit controller is easier to read after dark, which helps when changing presets on a trail. Check the connections under the dash periodically, since vibration can loosen plugs over long trips. Keep the lens clear of dust and mud so the beam stays consistent across all eight patterns.
- Mark the controller position before routing cable
- Store the harness so it does not rub the frame
- Check connections after rough driving
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 210413 |
| UPC | 849774031717 |
| Product type | Light bar |
| Size | 10 inch |
| Light source | LED |
| Lens color | Clear |
| Mounting type | Bracket |
| Beam patterns | 8 selectable |
| Beam angles | 90 degree broad to 15 degree spot |
| Fitment | Universal fit |
| Sold as | Single |
Vehicle fitment
Universal fit means this bar is not built for one vehicle, and no year, make, model or trim applies. Pick a mounting position and dash location that suit your own vehicle, and check the wiring route before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Dash Controller, Under Dash Module, wiring harness and mounting hardware come together in one package, so decide where the controller will sit before routing any cable. Lights of this type are usually wired through a fused relay, and road-use rules for driving lights vary by location, so check them where you drive.
What’s included
The Adapt light bar includes a RIGID Dash Controller, Under Dash Module, wiring harness and mounting hardware.









