Overview
The Pro Comp light wiring harness, part 76400, wires a pair of lights to a 12V electrical system. It fits 2007–2018 Jeep Wrangler JK models, including two-door and Unlimited four-door bodies.
The harness is pre-terminated. Battery terminals sit on one end, and Deutsch connectors on the other end plug into the lights. Along the run it carries an inline fuse holder, a 12V relay and a waterproof switch with an illuminated dash display. Pro Comp designed the harness to keep the lights wired to a fused, switched circuit.
Key features
- Pre-terminated harness for two lights
- 12V relay
- Inline fuse holder
- Waterproof switch with an illuminated dash display
- Deutsch connectors for the lights
Routing and wiring care
A pre-terminated harness saves time, but its layout still matters. Route the battery end close to the battery, keep the inline fuse holder in easy reach and secure the run away from moving suspension parts, exhaust heat and sharp edges. Use the included relay and fuse as supplied, since they protect the circuit when the lights draw current. Grommets and clips keep the wiring from chafing where it passes through the body.
Connectors and switches are the parts most often affected by weather and road grime. Check the Deutsch connectors for corrosion and make sure they seat fully before the first use. The illuminated switch should stay sealed when the cover is closed, and any cracked boot is worth replacing. Periodically test the lights, relay and fuse after heavy trail use, and keep spare fuses of the correct rating in the vehicle.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76400 |
| Lights supported | 2 |
| Voltage | 12V |
| Power end | Battery terminals |
| Light end | Deutsch connectors |
| Relay | 12V |
| Switch | Waterproof, illuminated |
| Protection | Inline fuse holder |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models, including two-door and Unlimited four-door bodies. Wrangler TJ and JL models fall outside that range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The battery terminals connect to the battery, so route the harness with the inline fuse holder close to the battery. Mount the switch where you can reach it. Wire the lights only through the relay and fuse as supplied, and check local rules on auxiliary lights before driving on public roads with them on.
What’s included
The wiring harness, relay, illuminated dash switch and inline fuse holder.
Not included: the two lights the harness connects to.











