Overview
The Warn Ascent Rear Bumper, part number 96290, is a sensor compatible truck rear bumper in black textured powder coat over 11-gauge steel. Warn designed it with an angled shape that sits high to keep maximum ground clearance and approach angles.
The bumper gives a styled look with a precise fit to the truck. It has integrated dual light ports for auxiliary flood or spot lights, which are sold separately, plus corner steps for easy access to the truck bed. It has room for oversize tires and pre-drilled bolt holes and cutouts for installation.
Check your truck’s year, model and trim before ordering.
Key features
- Angled high-sitting design for approach angle
- Dual light ports for flood or spot lights
- Sensor compatible
- Corner steps for bed access
- 11-gauge steel with black textured powder coat
- Room for oversize tires
- Pre-drilled bolt holes and cutouts
Light ports and tire clearance
Auxiliary lights are the most common add-on for a bumper like this, so think about where they will point before mounting anything. Flood lights spread light across the trail, while spot lights reach farther ahead. Wiring should be run through a protected path, with a switch and fuse, so the lights only draw power when you choose.
Angled and high-sitting bumpers can change how a truck approaches obstacles, so the bumper’s shape matters on steep ground. If you run oversize tires, check the clearance at full steering lock and at full suspension travel, since the bumper edges can become the limiting point. Corner steps help with bed access, but they are not a substitute for a proper ladder.
- Plan light placement before drilling or mounting
- Use a fuse and switch for auxiliary lights
- Check tire clearance at full steering lock
- Keep sensor wiring clear of the light ports
Specifications
| Brand | Warn |
|---|---|
| Part number | 96290 |
| UPC | 12748962908 |
| Series | Ascent |
| Part type | Rear bumper |
| Material | 11-gauge steel |
| Finish | Black textured powder coat |
| Lights | Dual light ports; lights not included |
| Sensors | Compatible |
| Fit type | Direct fit |
Vehicle fitment
Match the part number 96290 to your truck’s year, model and trim before ordering, since a different truck needs a different part number.
The Ascent bumper is made to match specific truck styling, so a different truck needs a different part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pre-drilled bolt holes and cutouts make the installation straightforward.
What’s included
Not included: the auxiliary lights.








