Brakes & Steering
Showing 1117–1128 of 1899 resultsSorted by popularity
-
Disc Brake Upgrade Kits
Baer Brakes Claw Rotor And Pad Combo Kit Rear Various 07-14 Chevrolet GMC And Cadillac Applications – 55133-1194
Disc Brake Upgrade KitsBaer Brakes Claw Rotor And Pad Combo Kit Rear Various 07-14 Chevrolet GMC And Cadillac Applications – 55133-1194
- Baer Brakes 55133-1194 rear Claw combo kit with slot, drilled and zinc-plated rotors
- Includes ceramic performance street pads and stainless-steel abutment hardware
- Fits 2007–2014 Chevrolet, GMC and Cadillac applications
- Direct bolt-on replacement for the covered vehicles
SKU: 55133-1194-BKCZ -
Disc Brake Upgrade Kits
Baer Brakes Claw Rotor And Pad Combo Kit Rear Various 14-20 Chevrolet GMC And Cadillac Applications – 55133-1707
Disc Brake Upgrade KitsBaer Brakes Claw Rotor And Pad Combo Kit Rear Various 14-20 Chevrolet GMC And Cadillac Applications – 55133-1707
- Baer Brakes 55133-1707 rear Claw combo kit with slot, drilled and zinc-plated rotors
- Includes Baer Claw ceramic performance street pads and stainless-steel abutment hardware
- Fits 2014–2020 Chevrolet, GMC and Cadillac applications
- Direct bolt-on replacement, no modifications needed
SKU: 55133-1707-BKCZ -
-
-
Brake Master Cylinder
Baer Brakes Remaster Replacement Master Cylinder Screw-On Cap Below Gasket – 6150090
Brake Master CylinderBaer Brakes Remaster Replacement Master Cylinder Screw-On Cap Below Gasket – 6150090
- Baer Brakes replacement bellows, part number 6150090
- Screw-on bellows only, for Baer ReMaster master cylinders
- Fits all Remaster master cylinders, pressure switch not included
- Sold individually, brake pressure switch not included
SKU: 6150090-BKCZ -
Brake Master Cylinder
Baer Brakes Master Cylinder Bullet 15/16 Inch And 1 Inch GM/Ford Remaster – 6150098
Brake Master CylinderBaer Brakes Master Cylinder Bullet 15/16 Inch And 1 Inch GM/Ford Remaster – 6150098
- Baer Brakes Master Cylinder Bullet, part number 6150098
- Fits Remaster GM and Ford master cylinders with 15/16 inch or 1 inch bores
- Adapts Remaster to short push rod boosters
- Billet aluminum, hard anodized, sold individually
SKU: 6150098-BKCZ -
Brake Master Cylinder
Baer Brakes Master Cylinder Bullet 1-1/8 Inch GM/Ford – 6150110
- Baer Brakes Master Cylinder Bullet 1-1/8 inch, part number 6150110
- Fits Remaster GM and Ford master cylinders with a 1-1/8 inch bore
- Adapts Remaster to short push rod boosters
- Billet aluminum, hard anodized, sold individually
SKU: 6150110-BKCZ -
Master Cylinder & Power Brake Parts
Baer Brakes Remaster Master Cylinder 2-Bolt Ford/GM Spacer – 6260258
Master Cylinder & Power Brake PartsBaer Brakes Remaster Master Cylinder 2-Bolt Ford/GM Spacer – 6260258
- Baer Brakes Remaster 2-bolt Ford/GM master cylinder spacer, part 6260258
- Fits Remaster 2-bolt GM and Ford master cylinders
- Spacer for long push rod applications, listed thickness 0.17
- Zinc plated finish, sold individually
SKU: 6260258-BKCZ -
-
Brake Hose
Baer Brakes 21.5 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800501
Brake HoseBaer Brakes 21.5 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800501
- Baer Brakes 6800501: a 21.5-inch braided brake hose set with a 3AN female straight end and a 10 mm banjo end at 20 degrees.
- Two hoses per set, packaged as a pair, with a Teflon liner and DOT approved construction.
- Attaches directly to an OE hard line; crush washers are not included.
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: 6800501-BKCZ -
Brake Hose
Baer Brakes 23 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800502
Brake HoseBaer Brakes 23 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800502
- Baer Brakes 6800502: a 23-inch steel braided brake hose set with a 3AN female straight end and a 10 mm banjo end at 20 degrees.
- Packaged as two hoses per set, each attaching directly to an OE hard line.
- Stainless steel hose material with a Teflon liner, DOT approved.
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: 6800502-BKCZ -
Brake Hose
Baer Brakes 25.25 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800503
Brake HoseBaer Brakes 25.25 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800503
- Baer Brakes 6800503 is a 25.25 inch braided brake hose set
- 3AN female straight end and 10mm, 20 degree banjo end
- Two stainless steel braided hoses supplied as a pair
- DOT approved, Teflon-lined, attaches to OE hard line
- Crush washers not included; fitment not listed
SKU: 6800503-BKCZ
What belongs in this category
This section groups the parts that stop and aim the vehicle. On the braking side you will find pads and rotors, complete disc kits, calipers, hoses and stainless lines, master cylinders, drum components, ABS parts, parking brake hardware and pedal parts. On the steering side there are tie rods, drag links, pitman arms, steering gearboxes, pumps, and hydraulic assist systems.
Upgrading brakes after a lift or tire change
Larger, heavier tires raise rotating mass and leverage on the brakes, so stopping distance can grow even though the brakes themselves are unchanged. Owners who tow or run tires several sizes over stock often upgrade pads and rotors first, then consider larger calipers or a big brake kit. Severe-duty pads, drilled and slotted rotors, and extended or stainless brake lines are common choices, each with tradeoffs in noise, dust and rotor wear.
- Replace pads and rotors as matched sets per axle.
- Replace hardware, shims and wear sensors when the kit includes them.
- Flush the fluid and bleed the system after opening any hydraulic line.
Steering parts after a lift
Lifting a vehicle changes steering geometry. Drag link flip kits, track bar brackets and heavier tie rods help restore proper angles and strength, and they matter more as tire size and trail abuse increase. Hydraulic assist or full hydraulic steering reduces effort with large tires and is a larger project, usually involving pumps, hoses and a cylinder.
Installation and safety
Brakes and steering are safety-critical systems. Unless you have the tools and experience, have them installed by a professional. Always torque fasteners to the manufacturer's specification, use new cotter pins and locking hardware where required, and have an alignment performed after replacing or modifying steering components. Bed in new pads following the pad maker's procedure and test the vehicle at low speed before driving it on the highway.
Confirming fitment
Many parts are specific to a model, axle, bolt pattern or rotor diameter. Confirm fitment for your exact year, make and model, check front versus rear, left versus right, and verify the details against the manufacturer's specifications. Part numbers on each product page make it easier to cross-check.
Inspection and maintenance
Check brake fluid level and color at every oil change, since fluid absorbs moisture over time and lowers its boiling point. Dark or milky fluid suggests it is due for a flush. Look at pad thickness through the caliper opening, and inspect rotors for deep grooves, lips at the edge or heat spots. Rubber brake hoses should be free of cracks, bulges and chafing, especially after a lift when hoses may be stretched.
For steering, grab each front wheel at the top and bottom and then at the sides while a helper watches the joints. Movement points to worn ball joints, wheel bearings or tie rod ends. Look for torn boots on tie rod ends, since dirt quickly destroys the joint. Hydraulic steering systems need periodic fluid checks and a look for leaks at every fitting. Address any looseness before it grows, because worn steering parts rarely fix themselves and loose steering is hazardous at speed.
Popular Brakes & Steering brands
- Baer Brakes (1,309)
- Power Stop (167)
- Crown Automotive (78)
- Omix-Ada (43)
- Moog (43)
- Skyjacker (38)
- Pro Comp Suspension (33)
- Rubicon Express (27)
- Trail Gear (23)
- PSC Steering (18)
- TeraFlex (18)
- EBC Brakes (17)
Shop Brakes & Steering by type
- Disc Brake Kits & Components (1,415)
- Performance Steering Upgrades (96)
- Master Cylinder & Power Brake Parts (90)
- Brake Lines & Fittings (209)
- Replacement Steering Components (34)
- ABS Brake Components (17)
- Drum Brake Kits & Components (22)
- Hydraulic Steering (11)
- Brake Pedal Components (4)
- Parking Brake Kits & Components (1)
Brakes & Steering FAQ
Do I need new brakes after installing bigger tires?
Not always, but larger tires add weight and leverage that can lengthen stopping distances. Many owners upgrade pads, rotors or brake lines to compensate. Inspect your current brakes and consider the vehicle's use, especially towing.
Are drilled and slotted rotors better?
They can help shed heat, gas and water, which some drivers value for towing and wet conditions. They may also wear pads faster and be noisier. Plain OE-style rotors remain a sound choice for normal driving.
What is a drag link flip kit?
It relocates the drag link mounting so the steering linkage sits at a better angle on a lifted vehicle. This can reduce bump steer. It is often paired with a track bar bracket, and an alignment afterward is important.
Should I replace brake parts in pairs?
Yes. Pads and rotors should be replaced as a set on each axle so braking stays even side to side. Calipers and hoses are usually also replaced in pairs for balanced performance.



