Overview
The Baer Brakes 3/16 Inch Brass Seat, part number 5517B, is a raw gold brass fitting seat for 3/16 inch inverted flare fittings and lines on Baer Remaster master cylinders and proportioning valves. It converts those valves from straight banjo fittings to inverted flare.
Baer Brakes offers this hardware for owners maintaining, upgrading or customizing a brake system built around Baer Remaster or proportioning valves. No specific vehicles are listed, so choose it by the valve and line size on your system rather than by year, make or model.
Key features
- Brass seat for 3/16 inch inverted flare fittings and lines
- Converts Baer Remaster and proportioning valves from straight banjo fittings to inverted flare
- Excellent corrosion resistance
- Raw finish in gold-toned brass
- Sold individually
Before you buy
A valve seat only works when the fitting, valve and line all match. Before ordering, identify the valve on your system and confirm whether its outlet uses a straight banjo connection or 3/16 inch inverted flare. Once the seat is installed, the connection becomes a flare joint, so the matching line and fitting need to be ready at the same time. Plan the job around the full set of parts rather than the seat alone.
Brake fluid leaks at this type of joint usually come from a fault in the assembly. A seat that is not fully seated, a flare cut off-square, or a fitting that is over-tightened can all cause weeping. Inspect the seat and flare for scoring or damage before assembly, and replace any line with a damaged flare rather than reusing it.
- Identify the existing fitting before ordering
- Have replacement 3/16 inch inverted flare lines ready
- Use clean brake fluid during the bleed
- Recheck the joint for leaks after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 5517B |
| UPC | 90127855843 |
| Material | Brass |
| Finish | Raw |
| Color | Gold |
| Fitting size | 3/16 inch inverted flare |
| Sold as | Each |
| Box count | 1 |
| Emission code | 6 |
| Country of origin | USA |
| Series | Baer Brakes |
Vehicle fitment
It is a valve-fitting component rather than a vehicle-specific part. Confirm that your master cylinder or proportioning valve is a Baer Remaster or proportioning valve that uses 3/16 inch inverted flare fittings before ordering.
Installation notes
The seat is meant for Baer Remaster and proportioning valves, so install it only on a valve that uses 3/16 inch inverted flare lines. Brake work is safety-critical; have a qualified technician check the seal and bleed the system after the fitting change.
What’s included
One brass seat (Quantity 1, Box count 1).
Not included: the Baer valve, and the 3/16 inch inverted flare lines and fittings.














