Jeep Wrangler (JK) Dana 44 Axle Parts, Axles, Gears, and Modifications
135 dana 44 axle parts, axles, gears, and modifications listed for the 2007–2018 Jeep Wrangler (JK)
Showing 97–120 of 135 resultsSorted by popularity
-
-
Dana 44 Bearings and Install Kits, Ring and Pinion Installation Kits
G2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
Dana 44 Bearings and Install Kits, Ring and Pinion Installation KitsG2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
- Minor ring and pinion installation kit for a 2008-and-newer JK rear Dana 44, part number 25-2053
- Includes pinion nut, pinion seal, crush sleeve, shims and ring gear bolts
- Keeps the existing bearings: no bearing change needed
- Compound and sealer included: thread locking, gear marking and silicone
SKU: G/225-2053 -
-
-
Dana 44 Hubs and Spindles, Hub Conversions
TeraFlex Front 8-Lug Locking Hub Conversion Kit – 3034411
Dana 44 Hubs and Spindles, Hub ConversionsTeraFlex Front 8-Lug Locking Hub Conversion Kit – 3034411
- Fits 2007 to 2016 Jeep Wrangler JK, two- and four-door
- Full float front conversion with forged 4340 chromoly 35-spline stub shafts
- Forged 4140 chromoly spindle and 8 on 6.5 inch wheel bolt pattern
- Includes the TeraFlex performance big rotor kit
- Part number 3034411
SKU: TER3034411 -
-
-
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 3.73 Ratio – 10010519
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 3.73 Ratio – 10010519
- Ultimate Dana 44 front axle with 3.73 ratio and factory electric locker
- Factory electric locker, selectable electronic locking differential
- 5/16 inch thick axle tubes and Spicer chromoly axle shafts
- Dana Spicer part number 10010519, UPC 23913483692
SKU: D/S10010519 -
Dana 44 Ball Joints
TeraFlex Dana 30/Dana 44 JK HD Ball Joint Set With Knurl – 3442022
- Set of four ball joints (two upper, two lower) for JK Dana 30 and Dana 44 axles, with knurl, part number 3442022
- Knurl for loose-fitting inner knuckles
- 4140 chrome moly ball and stud, sintered upper bushing
- Fits 2007–2015 Jeep Wrangler JK models
SKU: TER3442022 -
Dana 44 Ball Joints
TeraFlex Dana 30/Dana 44 JK HD Ball Joint Set Without Knurl – 3442002
- Set of four ball joints (two upper, two lower) for JK Dana 30 and Dana 44 axles, without knurl, part number 3442002
- 4140 chrome moly ball and stud, sintered bushing, high carbon spring
- Without knurl for tight knuckle bores
- Fits 2007–2015 Jeep Wrangler JK models
SKU: TER3442002 -
Dana 44 Ball Joints
TeraFlex Heavy Duty Dana 44/30 Ball Joint Kit with Knurl – 3440020
- Upper and lower ball joint kit with knurl for JK Dana 30 and Dana 44 axles, part number 3440020
- Knurled for loose-fitting knuckles
- Direct replacement for 2007–2011 and most 2012 models
- Late 2012 and newer models need modification before installing
SKU: TER3440020 -
Dana 44 Ball Joints
TeraFlex Dana 30/Dana 44 JK HD Ball Joint Pair Without Knurl – 3440000
- Upper and lower ball joint kit for JK Dana 30 and Dana 44 axles, without knurl, part number 3440000
- Sintered upper bushing and threaded lower top cap for preload
- Direct replacement for 2007–2011 and most 2012 models
- Late 2012 and 2013-and-newer JK models need grinding on the stub shaft
SKU: TER3440000 -
-
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 4.88 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL488AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 4.88 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL488AP5
- Fits 2007–2014 Jeep Wrangler (JK) models
- High pinion front axle with a 4.88 gear ratio and ARB Air Locker
- USA-made 4340 Chromalloy 1.5-inch 35-spline axle shafts
- 3 degrees of extra axle caster for lifts of 6 inches and up
- Part number C4JMFL488AP5
SKU: G/2C4JMFL488AP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 4.56 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL456AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 4.56 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL456AP5
- Fits 2007–2014 Jeep Wrangler (JK) models
- High pinion front axle with a 4.56 gear ratio and ARB Air Locker
- USA-made 4340 Chromalloy 1.5-inch 35-spline axle shafts
- Extra axle caster for lifts of 6 inches and up
- Part number C4JMFL456AP5
SKU: G/2C4JMFL456AP5 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Placer Gold Passenger Side Inner Front Axle – 197-2051-005
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 44 JK Placer Gold Passenger Side Inner Front Axle – 197-2051-005
- Front passenger side inner axle for Dana 44 JK, 35 splines
- Overall length 33.44 inches
- Uses the larger Rubicon 1350 series 5-7166X U-joint
- Machined for full circle snap rings
- Fits 2007–2014 Jeep Wrangler JK
SKU: G/2197-2051-005 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Placer Gold Driver Side Inner Front Axle – 197-2051-004
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 44 JK Placer Gold Driver Side Inner Front Axle – 197-2051-004
- Front driver side inner axle for Dana 44 JK, 35 splines
- Overall length 18.68 inches
- Uses the larger Rubicon 1350 series 5-7166X U-joint
- Machined for full circle snap rings
- Fits 2007–2014 Jeep Wrangler JK models
SKU: G/2197-2051-004 -
Dana 44 Axle Shafts, Replacement Axle Shafts
Dana 44 JK 35 Spline Rear Placer Gold Rear Chromoly Axle Shaft
Dana 44 Axle Shafts, Replacement Axle ShaftsDana 44 JK 35 Spline Rear Placer Gold Rear Chromoly Axle Shaft
- Rear axle shaft for Dana 44 JK, 35 splines, right or left side
- Forged 4340 chromoly steel, made in the USA
- Includes wheel studs and wheel bearings
- For use with 35 spline aftermarket lockers
- Fits 2007–2014 Jeep Wrangler JK models
SKU: G/2195-2052-35 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Passenger Side) – 195-2052-322
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Passenger Side) – 195-2052-322
- Rear passenger side axle shaft for Dana 44 JK Rubicon
- Forged 4340 chromoly steel, made in the USA
- Dual bolt pattern flange for 5 x 5 and 5 x 5.5
- For use with 32 spline aftermarket lockers
- Fits 2007–2014 Jeep Wrangler JK Rubicon
SKU: G/2195-2052-322 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Driver Side) – 195-2052-321
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Driver Side) – 195-2052-321
- Rear driver side axle shaft for Dana 44 JK Rubicon
- Forged 4340 chromoly steel, made in the USA
- Dual bolt pattern flange for 5 x 5 and 5 x 5.5
- For use with 32 spline aftermarket lockers
- Fits 2007–2014 Jeep Wrangler JK Rubicon
SKU: G/2195-2052-321 -
Dana 44 Axle Shafts
G2 Dana 44 JK 30 Spline Rear Chromoly Axle Kit – 96-2052-1-30
- Rear axle kit for 2007–2014 Jeep Wrangler JK non-Rubicon
- 30 splines, dual drilled 5 x 5 and 5 x 5.5 bolt pattern
- Includes wheel bearings, seals and screw-in wheel studs
- Does not include a differential
- Forged chromoly shafts, heat treated
SKU: G/296-2052-1-30 -
Dana 44 Axle Shafts
G2 Dana 44 JK Rubicon 32 Spline Rear Chromoly Axle Kit – 96-2052-3-32
- Rear axle shaft kit for 2007–2014 Jeep Wrangler (JK) with Dana 44 rear axles
- 32 spline shafts, dual drilled for 5 x 5 and 5 x 5.5 wheel patterns
- Includes wheel bearings, seals and screw in wheel studs
- Forged, heat treated alloy steel
- G2 Axle and Gear part number 96-2052-3-32
SKU: G/296-2052-3-32
