Select your vehicle
-13%

G2 Placer Gold Series Dana 44 JK Rubicon Rear Axle Shaft (Passenger Side) – 195-2052-322

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear passenger side axle shaft for Dana 44 JK Rubicon
  • Forged 4340 chromoly steel, made in the USA
  • Dual bolt pattern flange for 5 x 5 and 5 x 5.5
  • For use with 32 spline aftermarket lockers
  • Fits 2007–2014 Jeep Wrangler JK Rubicon

Description

Overview

The G2 Placer Gold Series Dana 44 JK Rubicon rear passenger side axle shaft, part 195-2052-322, is made in the USA for the rear right position. It is built for 32 spline aftermarket lockers and fits the 2007–2014 Jeep Wrangler JK Rubicon.

The shaft is forged from 4340 chromoly steel with a stronger forging and more material in its critical areas. The dual bolt pattern flange covers the 5 x 5 and 5 x 5.5 bolt patterns.

Key features

  • Rear passenger side shaft for the Dana 44 JK Rubicon
  • Forged 4340 chromoly steel
  • Dual bolt pattern flange covering 5 x 5 and 5 x 5.5
  • Built for 32 spline aftermarket lockers
  • Made in the USA

Driveline and passenger side care

The passenger side shaft carries torque from the differential to the right rear wheel, and it works with the locker and the other rear shaft as a pair. Keeping the two sides matched in spline count and flange pattern helps the axle run evenly, and mismatched parts can cause vibration or uneven wear over time.

Before installing, look over the seal, bearing and hub surfaces on the axle housing. Replacing a shaft often reveals a worn seal or bearing, which is easier to address while the axle is open. Rear brake components and the wheel bearing may also need inspection since they share the same area.

  • Replace both shafts together when one fails
  • Inspect the axle seal while the shaft is out
  • Check the brake parts near the hub
  • Re-check hub bolts after the first drive

Specifications

Brand G2 Axle and Gear
Part number 195-2052-322
UPC 631410118759
Axle type Dana 44 JK Rubicon
Position Rear right
Side Passenger side
Material Forged 4340 chromoly steel
Bolt pattern Dual bolt pattern flange, 5 x 5 and 5 x 5.5
Locker compatibility 32 spline aftermarket lockers
Origin Made in the USA

Vehicle fitment

Fits 2007–2014 Jeep Wrangler (JK) Rubicon and Unlimited Rubicon models.

Wrangler TJ, YJ, LJ and JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check your locker’s spline count before you buy, since this shaft is built for 32 spline aftermarket lockers.

What’s included

One rear right shaft.

SKU: G/2195-2052-322 Categories: ,

Specification

Shipping weight 22.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2014Rubicon, Unlimited Rubicon

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this shaft fit a 2010 Wrangler JK Rubicon?

Yes. It fits 2007–2014 Jeep Wrangler (JK) Rubicon and Unlimited Rubicon. Confirm your year and locker spline count before ordering.

Is it for the passenger side?

Yes. It is the rear right shaft, and the driver side counterpart is a separate G2 part, number 195-2052-321, so order both sides if you need them.

Where is it made?

It is made in the USA. The shaft is forged from 4340 chromoly steel, with more material in its critical areas, as part of the Placer Gold Series.

Should both rear shafts be replaced together?

Often, yes. Matched shafts wear at similar rates, and replacing only one can leave the other side with an older, weaker part. If one shaft has failed from age or damage, inspect the other side at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon