Jeep Wagoneer (SJ) Axle Parts
25 axle parts listed for the 1963–1990 Jeep Wagoneer (SJ)
Every part on this page is listed by its maker for this model; the most represented brands are Crown Automotive, Omix-Ada and G2 Axle and Gear. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 25 resultsSorted by popularity
-
Dana 44 Bearings and Install Kits, Wheel Bearings
Crown Automotive Dana 44 and Model 20 Wheel Bearing – 83503064
Dana 44 Bearings and Install Kits, Wheel BearingsCrown Automotive Dana 44 and Model 20 Wheel Bearing – 83503064
- Rear wheel bearing for Dana 44 and Model 20 axles
- Crown Automotive part number 83503064, UPC 848399025101
- Covers Jeep CJ, Cherokee, Wagoneer, Comanche and Wrangler models from 1966 to 2018
- Direct fit in the rear position
SKU: CRO83503064 -
-
Dana 44 Oil Seals, Spindle Seal
Crown Automotive Front Wheel Seal – J5359703
- Front inner hub wheel seal for Dana 44 front axles.
- Fits 1974 to 1983 Cherokee SJ, 1974 to 1986 J10 and J20, 1974 to 1990 Wagoneer SJ and 1984 to 1991 Grand Wagoneer SJ.
- Part number J5359703, UPC 848399064339.
SKU: CROJ5359703 -
Front Axle U-Joints
Crown Automotive Front Axle Universal Joint – 8126638SP
- Crown Automotive front axle universal joint, part number 8126638SP
- 1.187 inch caps, sealed and non-greasable
- Fits Wrangler JK, TJ and YJ, Cherokee XJ, Grand Cherokee ZJ and Wagoneer models
- Direct fit replacement part
SKU: CRO8126638SP -
Dana 44 Oil Seals, Inner Axle Seals
Crown Automotive Dana 44 Axle Shaft Inner Seal – 83501009
- Dana 44 axle shaft inner seal, 2-5/8 inch outside diameter, for the front inner position.
- Fits 1977 to 1983 Cherokee SJ, 1977 to 1990 Wagoneer SJ and related SJ-era models
- Part number 83501009, UPC 848399024203.
SKU: CRO83501009 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
Alloy USA Dana 44 Rear Axle Shaft – 21113C
- Driver side rear axle shaft, 33 splines, 29.250 inch overall length
- Does not include bearings, seals or studs
- Requires an aftermarket 33 spline differential
- Fits Cherokee, Grand Cherokee, Wagoneer, CJ and Wrangler models
- Chromoly, made from 1541H or 4140 steel
SKU: ALY21113C -
Dana 44 Axle Shafts, Replacement Axle Shafts
Alloy USA Dana 44 Outer Axle Shaft – 10127
- Front left outer stub shaft for Dana 44, 19 splines
- Overall length 9.940 inches
- Fits 1971–1983 Jeep Wagoneer and 1984–1991 Jeep Grand Wagoneer
- Made from 1541H or 4140 steel, induction hardened
- Alloy USA part 10127
SKU: ALY10127 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-012
- Passenger-side inner axle shaft for the Dana 44 front axle, part number 97-2033-012
- 32.120-inch overall length, 30 splines
- Accepts a 5-760X U-joint; machined for full circle clips
- Machined for full circle clips on the retainer end
SKU: G/297-2033-012 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-011
- Driver-side inner axle shaft, part number 97-2033-011, for the Dana 44 front axle
- 30 splines, accepts a 5-760X U-joint
- Made for 1980–1990 Jeep Wagoneer (SJ)
- Machined to accept full circle clips
SKU: G/297-2033-011 -
Dana 44 Hubs and Spindles, Spindle Nut
Omix-ADA Dana 44 Outer Spindle Nut – 16527.37
- Outer spindle nut for Dana 44 front axles
- Direct OE replacement built to original specifications
- Covers 1974–1983 Wagoneer and 1984–1991 Grand Wagoneer (SJ) vehicles.
- Limited five-year manufacturer warranty
SKU: OAI16527.37 -
-
Dana 44 Hubs and Spindles, Spindle Nut Washer
Omix-ADA Spindle Washer – 16527.35
- Dana 44 spindle washer
- Direct OE replacement built to original specifications
- Covers 1974–1983 Wagoneer and 1984–1991 Grand Wagoneer (SJ) vehicles.
- Limited five-year manufacturer warranty
- Part number 16527.35
SKU: OAI16527.35 -
-
Replacement Axle Shafts
Alloy USA Dana 35 Rear Axle Shaft – 21109
- Dana 35 chromoly rear axle shaft, 30 spline, driver side
- For 87-90 non C-clip axles; manufacturer list names 1984-1990 Jeep Cherokee (XJ), Comanche, Wagoneer and Wrangler (YJ)
- Requires an aftermarket 30 spline differential; bearings, seals and studs not included
SKU: ALY21109 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-009
- Driver-side inner axle shaft for the Dana 44 front axle, part number 97-2033-009
- 30 splines, accepts a 5-760X U-joint
- Made for 1974–1979 Jeep Wagoneer (SJ)
- Machined to accept full circle clips
SKU: G/297-2033-009 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-010
- Passenger side front inner shaft for Dana 44 axles, 30 splines
- Fits 1974–1979 Jeep Wagoneer, front axle position
- Overall length 14.690 inches, machined for full circle clips
- Accepts a 5-760X U-joint
- Forged high-grade alloy steel, heat treated
SKU: G/297-2033-010
