Overview
The Alloy USA Dana 44 rear axle shaft, part 21113C, is a driver side rear replacement shaft with 33 splines and a 29.250 inch overall length. It is sold as a shaft only, without bearings, seals or studs, and it requires an aftermarket 33 spline differential.
The shaft is made from 1541H or 4140 steel, heat treated and induction hardened, with twice the tensile strength of stock. Fitment covers Jeep Cherokee SJ and XJ, Grand Cherokee WJ and ZJ, Wagoneer SJ, CJ5 and CJ7, and Wrangler YJ, TJ, LJ and JK.
Key features
- Driver side rear shaft
- 33 splines
- 29.250 inch overall length
- Chromoly shaft from 1541H or 4140 steel
- Heat treated and induction hardened
- Up to 35% stronger than stock.
Driver side Dana 44 upgrades
Dana 44 rear axles are common across the Jeep models in this range, and a driver side shaft is often replaced alone after a break. Before buying, measure the overall length of the old shaft and count the splines on the carrier, since a mismatch will prevent the shaft from seating. Many owners replace a matching pair of shafts when rebuilding a worn axle, so both sides wear evenly.
Heavy trail use puts repeated shock loads through the shafts, so check them after each season for twisting at the splines and grease leaks at the hub. Keep the axle breather clear and recheck bearing preload during the rebuild. A well-set bearing and fresh seals help a new shaft last longer.
- Measure the old shaft’s overall length
- Count the carrier splines before buying
- Check the hub for grease leaks
- Recheck bearing preload after a rebuild
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 21113C |
| UPC | 804314203887 |
| Axle type | Dana 44 |
| Axle location | Rear |
| Side | Driver side |
| Spline count | 33 splines |
| Overall length | 29.250 inches |
| Material | Chromoly, 1541H or 4140 steel depending on application |
| Requires | Aftermarket 33 spline differential |
Vehicle fitment
It fits Jeep Cherokee SJ (1976–1983) and XJ (1987–1990), Grand Cherokee WJ (2000–2003) and ZJ (1993–1998), Wagoneer SJ (1971–1983), CJ5 (1967–1975) and CJ7 (1985–1986), and Wrangler YJ (1988–1995), TJ (1997–2006), LJ (2004–2006) and JK (2007–2011).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shaft needs an aftermarket 33 spline differential, so confirm your carrier before ordering. Bearings, seals and studs are not included and have to be bought separately.
What’s included
One driver side rear axle shaft.
Not included: bearings, seals and wheel studs.








