Overview
The Dana Spicer Front Dana 44 3.92 Gear Ratio Ring and Pinion, part number 22104-5X, is a front axle ring and pinion gear set for the Dana 44 with a 3.92 ratio. It fits 58 vehicle entries, beginning with the 1973–1974 Chevrolet Blazer.
A ring and pinion set is the pair of gears inside the differential that turns driveshaft rotation into axle rotation, and the gear ratio sets how many times the pinion turns for each turn of the axle. Dana Spicer says its genuine parts rely on Dana design, engineering, testing and manufacturing processes working together.
Key features
- Front Dana 44 ring and pinion gear set
- 3.92 gear ratio
- Front axle location
- Direct fit for the listed vehicles
- Dana Spicer genuine part
Gear ratio considerations
A gear ratio sets how the engine’s power is multiplied at the wheels, which affects acceleration, towing capacity and highway speed. A lower numerical ratio usually favors fuel economy and highway cruising, while a higher numerical ratio improves low-speed pull and trail control. Changing the ratio also changes the speedometer reading, so the gauge should be checked after the change.
Tire size changes the effective gear ratio, so the combined result should be considered when choosing a ratio. Ring and pinion changes are often paired with new carrier bearings, a pinion seal and gear oil, since the whole assembly is involved in the change. Check the existing axle type before ordering.
- Confirm the front Dana 44 axle before ordering
- Consider tire size alongside the gear ratio
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S22104-5X (22104-5X) |
| Product type | Ring and pinion gear set |
| Axle type | Dana 44 |
| Axle location | Front |
| Gear ratio | 3.92 |
| Popular axle manufacturer | Dana |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 22104-5X has 58 entries, starting with 1973–1974 Chevrolet Blazer; 1973–1980 Chevrolet C10 Suburban; 1973–1980 Chevrolet C20 Suburban; and 55 more entries. The full list, with trim levels, appears in the Fitment tab.
The list is specific: confirm that your vehicle and year appear in the Fitment tab, since a Dana 44 axle name alone does not confirm that this gear set fits your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Driveline, axle and seal work is safety-critical and often needs special tools, so professional installation is the better choice. Support the vehicle on rated jack stands, never on a jack alone. Follow your vehicle’s service procedure for fastener torque and fluid type. Re-check fasteners after the first miles of driving and again after off-road use. Check for leaks after the first miles.
What’s included
This is a front Dana 44 ring and pinion set with a 3.92 ratio.
Not included: Check the package contents against your installation before starting, including bearings, seals, gear oil and carrier hardware.










