Overview
The Crown Automotive 8126638SP is a sealed, non-greasable front axle universal joint with 1.187 inch caps. It goes at the front driveshaft at the front axle, and the same joint is also numbered CRO8126638SP.
Crown Automotive has made Jeep replacement parts for over 50 years, with over 8,000 part numbers.
The defining details of the 8126638SP are its 1.187 inch caps and its sealed, non-greasable construction. Joints that cannot be greased have no fitting, so the lubrication is fixed at manufacture. The location is the front driveshaft at the front axle.
The vehicle list is unusually broad, reaching from the 1974 J10 and J20 trucks to the 2012 Wrangler JK. Because one part number is shared across so many models, comparing cap diameter against the old joint is the most reliable check.
Key features
- Front axle universal joint
- 1.187 inch caps
- Sealed and non-greasable
- For the front driveshaft at the front axle
- Direct fit replacement part
Joint wear and driveline checks
A universal joint lets the driveshaft work through changing angles as the axle moves over bumps. A sealed, non-greasable joint has no fitting, so its service life depends on seal integrity and on driveline angles that stay within a sensible range. Lift height, body flex and worn control arms can all change those angles and wear the joint sooner.
Vibration is the most common sign of a failing joint, especially at highway speed or when accelerating. A clunk when shifting between drive and coast, or dry caps with rust streaks, also points to wear. Inspect the joint for play by hand, check the driveshaft balance and angles, and replace the joint before it damages the yoke or the shaft.
- Check for play at the caps
- Inspect the yoke for wear
- Look at the driveshaft for dents or imbalance
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 8126638SP |
| UPC | 848399049084 |
| Product type | Front axle universal joint |
| Also cataloged as | CRO8126638SP |
| Cap size | 1.187 inch |
| Lubrication | Sealed, non-greasable |
| Position | Front driveshaft at front axle |
| Fit type | Direct fit |
Vehicle fitment
The joint fits a wide range of Jeep models, from full-size Wagoneers to the Wrangler JK.
- 1994–2001 Jeep Cherokee (XJ) (Classic, Country, Limited, SE, Sport)
- 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi)
- 1984–1991 Jeep Grand Wagoneer (SJ) (Base, Limited)
- 1974–1988 Jeep J10 (Base)
- 1974–1988 Jeep J20 (Base)
- 1974–1990 Jeep Wagoneer (SJ) (Base, Brougham, Custom, Limited)
- 2007–2012 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
- 1993–1995 Jeep Wrangler (YJ) (Base, Renegade, Rio Grande, SE, Sahara)
The Wrangler JK fit covers 2007–2012, the XJ 1994–2001 and the YJ 1993–1995. Confirm fit for your vehicle’s year, model and trim before ordering, since other years need a separate check.
Installation notes
Compare the cap size and sealed design with your existing joint before you remove it.
What’s included
One front axle universal joint.









