Dodge Durango Suspension
30 suspension listed for the 1998–2026 Dodge Durango
Every part on this page is listed by its maker for this model; the most represented brands are Rancho, Pro Comp Suspension and Firestone Ride-Rite. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Shock Absorbers 25
Showing 1–24 of 30 resultsSorted by popularity
-
Leveling Compressor Kits
AirLift Load Controller II On-Board Air Compressor Control System – 25812
- AirLift Load Controller II on-board compressor control system, part number 25812
- Levels vehicle from side to side
- Dual gauge and 5 psi low pressure sensor
- Comes with new wiring harness
- Fits many 2007–2018 trucks, SUVs and cars
SKU: AIR25812 -
Leveling Compressor Kits
Firestone Air Command™ F3 Wireless Assembly Kit – 2592
- Firestone Air Command F3 wireless assembly kit, part number 2592
- Includes heavy duty compressor, ECU and F3 wireless remote
- Includes tubing, wire harness and fittings
- Wireless design adjusts air springs from inside or outside the vehicle
- Fits 2008–2018 trucks, SUVs and crossovers
SKU: FIR2592 -
-
Leveling Compressor Kits
Firestone Ride-Rite Wireless Air Command Generation II – 2427
- Firestone Ride-Rite Wireless Air Command Generation II, part number 2427
- Wireless controller for the air suspension system
- Heavy duty compressor and gauged accessory port named in the features
- Fits 2009–2017 trucks and SUVs across many makes
SKU: FIR2427 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999029
- Rancho RS999029 front shock absorber for Ford Bronco and F-Series trucks plus Dodge Dakota and Durango
- Listed with no lift or drop (w/0 in. Lift/Drop)
- Nine-position manual or remote tuning system
- 2.75-in. (70mm) body with an 18mm chrome rod
- Protective boot and red urethane bushings included
SKU: RANRS999029 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999010
- Rancho RS999010 rear shock absorber for Dodge Dakota and Durango, plus Ford Ranger and Mazda B-Series
- Listed with a 2.5 in. lift
- Nine-position manual or remote tuning system
- 2.75-in. (70mm) body with an 18mm chrome rod
- Protective boot and red urethane bushings included
SKU: RANRS999010 -
Shock Absorbers
Rancho RS7000MT Monotube Shock – RS7388
- Fits listed 2004–2009 Dodge Durango models, including SLT and Limited trims
- Front position, RS7000MT series, part RS7388, lift height noted as w/0 in. Lift/Drop
- Ten stage velocity-sensitive valving in a gas-charged monotube
- Chrome 14mm rod with black natural rubber bushings and a protective boot
SKU: RANRS7388 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55248
- Rear RS5000X Series gas-charged shock for 1997–2004 Dodge Dakota and 1998–2003 Dodge Durango
- Progressive engagement valving and tuned compression control valve
- Enlarged 2 1/4-in. twin tube body and 16mm Nitro-Carburized rod
- Part number RS55248, UPC 39703009485
- Limited Lifetime Warranty
SKU: RANRS55248 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5389
- Rear position Rancho RS5389 for 2004–2009 Dodge Durango
- Listed trims: Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT
- Gas charged body with ten-stage velocity sensitive valving
- 5/8-in. (16mm) piston rod and 1 3/8-in. (35mm) piston
- Red protective boot included
SKU: RANRS5389 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5388
- Fits 2004–2009 Dodge Durango in Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims
- Front position, gas charged body, Rancho part number RS5388
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) piston rod and 1 3/8-in. (35mm) piston
- Red protective boot included
SKU: RANRS5388 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5248
- Rancho RS5248, a rear gas-charged shock absorber from the RS5000 Series
- Fits 1997-2004 Dodge Dakota and 1998-2003 Dodge Durango
- Designed for no lift or drop (w/0 in. Lift/Drop)
- Ten-stage velocity sensitive valving, 5/8-in. (16mm) rod, 1 3/8-in. (35mm) piston
SKU: RANRS5248 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5010
- Rancho RS5010 rear gas-charged shock absorber, RS5000 Series
- Fits 1997–2004 Dodge Dakota and 1998–2003 Dodge Durango
- Also fits 1983–1992 Ford Ranger, 1994–1996 Mazda B3000 and 1994–1997 Mazda B4000
- Ten-stage velocity sensitive valving with a 5/8-in. (16mm) piston rod
- Lift rating w/2.5 in. lift; red protective boot included
SKU: RANRS5010 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 924507
- Rear ES9000 Series gas charged twin tube shock with loop mounts at both ends
- Fits the 1998 to 2003 Dodge Durango and 2007 to 2018 Jeep Wrangler JK
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Rated for a 0 to 1.5 in lift
- Shock boots sold separately
SKU: EXP924507 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 914512
- Pro Comp ES9000 front shock, part number 914512, factory upper and lower mounts
- Fits 1998 to 2003 Dodge Durango
- Rated for 0 to 1 in. lift; description gives 14.71 in. extended and 9.56 in. collapsed
- Gas-charged twin-tube design with 10-stage valving
SKU: EXP914512 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-185233
- Fits the 1997–2003 Dodge Dakota and 1998–2003 Dodge Durango
- Front position, direct fit, 0 in. lift/drop
- Gas-charged monotube design with a 2 in body diameter
- Yellow finish, boots included, no reservoir
- Part number 24-185233, UPC 651860428826
SKU: BIL24-185233 -
-
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5609
- Fits 1997–2004 Dodge Dakota and 1999–2003 Dodge Durango
- Fits 1984–1995 Toyota Pickup, 1993–1998 Toyota T100 and 1995–2004 Toyota Tacoma
- Front position gas charged shock absorber
- Lift entry reads w/0 in. Lift/Drop
- Part number RS5609, UPC 39703560900
SKU: RANRS5609 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55609
- Front RS5000X Series shock absorber, part number RS55609
- Fits Dodge Dakota, Dodge Durango and Toyota pickup, T100 and Tacoma trucks
- Progressive engagement valving and a 1 3/8-in. Sintered Iron piston
- Limited Lifetime Warranty stated by Rancho
SKU: RANRS55609 -
-
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5147
- Rear shock absorber from the Rancho RS5000 Series, part number RS5147
- Fits 1997–2004 Dodge Dakota and 1999–2003 Dodge Durango models
- Ten-stage velocity sensitive valving with 5/8-in. (16mm) piston rod
- Gas charged, with 1 3/8-in. (35mm) piston
- Red protective boot included; sold as each
SKU: RANRS5147 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 924509
- Rear ES9000 Series gas charged twin tube shock with loop mounts at both ends
- Fits many Chevrolet, GMC, Ford, Dodge, Jeep, Toyota, Isuzu, Mazda and Mercury trucks and SUVs
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Rated for a 2.5 to 4 in lift
- Shock boots sold separately
SKU: EXP924509 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 914515
- Pro Comp ES9000 front shock, part number 914515, stem upper and loop lower mounts
- Extended 14.71 inch, collapsed 9.56 inch, travel 5.15 inch
- Long fitment list: Chevrolet, GMC, Dodge, Ford, Isuzu, Mazda, Mitsubishi and Toyota trucks from 1981 to 2011
- Rated for 0 in. lift or drop; 10-stage valving, non-adjustable
SKU: EXP914515 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509
