Overview
The Pro Comp 924507 is a rear ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It fits the 1998 to 2003 Dodge Durango and the 2007 to 2018 Jeep Wrangler JK, including the Unlimited versions.
The shock measures 24.84 inches extended and 14.82 inches collapsed, which gives 10.02 inches of travel. Pro Comp rates it for a 0 to 1.5 inch lift. The twin tube body uses a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving. Shock boots are sold separately.
Key features
- Rear position with loop mounts at both ends
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Loop mounts on the trail
Loop mounts pivot on a bushing or bracket at each end, so the shock works through a short arc rather than a fixed line. Over time the bushing wears, and the shock can knock or wander. Worn loops are a common reason a shock feels loose even when the body is undamaged.
Trail use puts extra load on shock mounts, especially when the axle articulates. Check the welds and loops after rough runs, looking for hairline cracks. Keep the shock clean and inspect the boot if one is fitted. Replacing a shock in a matched pair on the same axle keeps handling predictable.
- Inspect loop eyes and bushings after off-road use
- Look for oil on the shock body or shaft
- Keep loop brackets tight and free of mud
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924507 |
| UPC | 614901696400 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 24.84 in |
| Collapsed length | 14.82 in |
| Travel length | 10.02 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1.5 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1998 to 2003 Dodge Durango in Base, R/T, SLT, SLT Plus, SXT and Sport trim, and the 2007 to 2018 Jeep Wrangler JK in 70th Anniversary, 75th Anniversary, Sahara, Sport, Sport S and X versions, including Unlimited models.
Durango models from 2004 on, and Wrangler TJ, JL and YJ models, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need matching loop brackets or bushings. The 0 to 1.5 inch lift range suits Durango and Wrangler JK trucks close to stock height.
What’s included
One rear shock, sold as each. A boot is not part of the sale.
























