Overview
The Bilstein 4600 Series 24-027908 is a rear gas-charged monotube shock absorber with a 2 in body diameter. It is a direct fit for the 1998–2003 Dodge Durango in Base, R/T, SLT, SLT Plus, SXT and Sport trims, with a yellow finish and boots included.
Heat moves from the oil to the outer surface of the shock body, where it dissipates efficiently. A dividing piston lets the oil expand as heat builds, which helps prevent aeration and viscosity loss so damping stays steady as temperatures rise. The seamless tube is extruded for tight tolerances and consistent wall thickness, which adds strength and supports heat release over the shock’s service life.
Key features
- Patented gas-charged monotube design that Bilstein says transfers heat from the oil to the shock body for efficient dissipation.
- Dividing piston that lets the oil expand as heat builds, reducing aeration and viscosity loss.
- Seamless monotube tube made by a special extrusion method for consistent wall thickness and tight tolerances.
- Piston head that allows independent tuning of compression and rebound damping forces.
- Uses fewer components than typical twin tube and road sensing designs.
- Boots included.
Gas pressure and handling
A gas-charged shock holds pressurized gas inside the body, which helps keep the damping fluid from foaming when it works hard. Durango owners often use the vehicle for towing or highway trips, where the rear suspension sees steady loads and sustained heat. Under those conditions, a shock that handles heat well keeps the rear end settled and controlled.
Handling a rear shock safely starts with reading the body for signs of damage before it goes on the vehicle. Check for oil leaks, dents in the body and a shaft that feels rough when moved by hand. Upper mounts and their rubber should be inspected at the same time, since worn rubber can add noise and let the shock move out of line.
- Inspect upper mount rubber for splits
- Check bump stops during rear shock replacement
- Keep the shock upright when storing
- Replace worn bump stops together with the shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-027908 |
| UPC | 651860433080 |
| Shock series | 4600 Series |
| Shock type | Monotube, gas charged |
| Body diameter | 2 in |
| Position | Rear |
| Fitment type | Direct fit |
| Lift/drop | 0 in. lift/drop |
| Reservoir | No |
| Finish | Yellow |
| Boots | Included |
Vehicle fitment
The manufacturer fitment list covers the 1998–2003 Dodge Durango in the Base, R/T, SLT, SLT Plus, SXT and Sport trims. Fitment is based on those listed years, model and trims.
The list does not cover the Durango for 2004 and later years or other Dodge models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks hold pressurized gas, so do not heat, puncture or disassemble this shock during installation or disposal.
What’s included
A Bilstein 4600 Series shock absorber, part number 24-027908, with boots included.









