Overview
The Rancho RS5388 is a front shock absorber from the RS5000 Series, made for the 2004–2009 Dodge Durango. It is a gas charged shock with ten-stage velocity sensitive valving and a red protective boot, built for light trucks and sport utility vehicles.
The RS5000 line has served light trucks since 1985 and is engineered for both stock and raised vehicles. It suits on-road and off-road driving, and the shock carries a limited lifetime warranty from Rancho.
Key features
- Gas charged body
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot included
- Front position for the Durango
Things to check on a Durango
A Durango front shock does a lot of work every time the vehicle goes over a dip, a curb or a patch of broken pavement. It limits how quickly the springs rebound, which keeps the front tires in contact with the road and the steering steady. Worn shocks often show up as a floaty feel at highway speed, a longer settle after braking, or a nose that dips harder than before.
Replacement is simpler when the rest of the front end is in good shape. Inspect the upper mounts, lower bolts and bushings while the old unit is out, and replace any part that is cracked or loose. Torque the fasteners to the correct value for the vehicle, and drive a short distance afterward to check for noise or pull.
- Look for oil residue along the shock body
- Check the bump stops for cracks or flattening
- Test the front end by bouncing each corner after installation
- Keep the boot clean so it can protect the shaft
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5388 |
| UPC | 39703002912 |
| Series | RS5000 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Body | Gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod | 5/8-in. (16mm) diameter |
| Piston | 1 3/8-in. (35mm) diameter |
| Protective boot | Red, included |
| Unit | Each |
Vehicle fitment
It fits the 2004–2009 Dodge Durango in Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims. Years outside that range and other vehicles fall outside this fit.
Other makes and other Durango generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rancho lists 0 in. lift/drop for this shock, so it is intended for a vehicle at stock ride height. Use jack stands on a level surface and support the suspension before removing the old front shock.
What’s included
The shock includes a red protective boot.
Not included: Check whether your installation needs separate mounting hardware before starting.









