Overview
The Rancho RS5389 is a rear shock absorber for the 2004–2009 Dodge Durango, part of Rancho’s RS5000 Series of gas charged shocks. It has ten-stage velocity sensitive valving, a red protective boot and a direct fit design.
The RS5000 is built for light trucks and SUVs that run stock or lifted, and it suits on-road and off-road use. The shock carries a limited lifetime warranty from Rancho.
Key features
- Rear position for the Durango
- Gas charged body
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot
Rear shock basics
The rear shocks on a Durango control the body as the vehicle moves over bumps and through turns, and they help keep the back tires planted under load. A rear shock that has lost its damping can allow the back of the vehicle to bounce after a dip, making the ride feel loose and reducing confidence on wet pavement.
When a rear shock is replaced, inspect the rest of the rear suspension at the same time, including springs, bushings and the mounting bolts on both sides. Rear shocks are usually replaced in pairs so the vehicle handles and rides evenly from left to right. Keep the protective boot clean, avoid parking the vehicle in deep mud for long periods, and check the mounts after rough off-road trips.
- Look for fluid leaking down the shock body
- Watch for cupping on the rear tires
- Check the eye mounts for wear or cracks
- Use stands on a level surface before removing the old unit
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5389 |
| UPC | 39703002929 |
| Series | RS5000 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Body | Gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod | 5/8-in. (16mm) diameter |
| Piston | 1 3/8-in. (35mm) diameter |
| Protective boot | Red, included |
| Unit | Each |
Vehicle fitment
It fits the 2004–2009 Dodge Durango in Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims. Other years and makes fall outside this fit.
Front-position shocks and vehicles outside this list are not covered by this rear-position part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift is 0 in. lift/drop, so the design targets stock ride height. Support the axle securely with stands while the old shock is removed.
What’s included
The shock includes a red protective boot.
Not included: Confirm whether separate mounting fasteners are needed before starting the swap.









