Select your vehicle

Rancho RS5000 Series Shock Absorber – RS55389

Rancho

$63.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 11:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear RS5000 Series gas shock absorber for 2004–2009 Dodge Durango
  • No lift or drop specified
  • Ten-stage velocity sensitive valving with a 16 mm rod
  • Part number RANRS55389

Description

Overview

The Rancho RS55389 is a rear RS5000 Series shock absorber for the 2004 through 2009 Dodge Durango. It is built for a Durango at factory ride height, with no lift or drop.

The shock uses ten-stage velocity sensitive valving, a 5/8-inch (16 mm) piston rod and a 1 3/8-inch (35 mm) piston. Each unit comes with a red protective boot. The RS5000 Series is a workhorse shock for light trucks and sport utility vehicles, and it carries a limited lifetime warranty.

Key features

  • Rear position shock absorber
  • Ten-stage velocity sensitive valving
  • 5/8-inch (16 mm) diameter piston rod
  • 1 3/8-inch (35 mm) diameter piston
  • Red protective boot included
  • Gas charged

Before you buy

A rear shock sets how quickly the body settles after a bump, and on a Durango that affects steering stability and towing comfort. Because the unit is built for stock ride height, the suspension geometry around it matters. If the vehicle has a lift or a load setup that changes its height, the shock’s length should be checked before the purchase is made.

Replacing rear shocks in pairs keeps the rear end balanced. Inspect the boots and seals on the old shock, and look at the upper and lower bushings for wear. When the new unit is installed, tighten the mounting bolts to the vehicle’s specification and recheck them after the first drives.

  • Note the ride height of the vehicle before buying
  • Inspect the old shock’s boot and seals
  • Recheck mounting bolts after the first few drives

Specifications

Brand Rancho
Part number RANRS55389
Series RS5000
Position Rear
Lift or drop None specified
Charge Gas charged
Piston rod 5/8-inch (16 mm)
Piston 1 3/8-inch (35 mm)
Sold as Each

Vehicle fitment

It is a direct fit for the 2004 through 2009 Dodge Durango in the Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT versions.

The list does not include the Durango model years before 2004 or after 2009, or other Dodge SUVs. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The shock comes with a red protective boot and is sold as each.

Fitment

VehicleYearsTrims
Dodge Durango2004–2009Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS55389 fit a 2010 Dodge Durango?

No, the list covers 2004 through 2009 Durango models only. Check the model year on your SUV before ordering this rear shock.

Does this Durango shock suit a lifted vehicle?

No. The shock is built for stock ride height and has no lift or drop. A lifted Durango should have its shock length checked before ordering.

What rod size does the RS55389 use?

It has a 5/8-inch (16 mm) piston rod and a 1 3/8-inch (35 mm) piston. The unit also has ten-stage velocity sensitive valving and a red protective boot.

Should rear shocks be replaced in pairs?

Usually, yes. When one rear shock wears out, the other has often lost damping too, and matched units keep the ride and handling even from side to side. Check both sides for leaks and worn bushings at the same time.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon