Overview
The Firestone Air Command F3 Wireless Assembly Kit, part number 2592, is a complete wireless air assembly for Firestone Ride-Rite air springs. It adds an air source with a heavy duty compressor, an ECU and an F3 wireless remote so the air springs can be adjusted to suit different loads and road conditions.
It fits many 2008–2018 trucks, SUVs and crossovers, including Ford F-150, Chevrolet Silverado, GMC Sierra and Jeep Wrangler (JK).
Key features
- Wireless remote for adjusting air springs from inside or outside the vehicle
- Heavy duty compressor included
- ECU included
- Tubing, wire harness and fittings included
- Adjusts air springs for different loads and road conditions
Wireless assembly installation
A complete wireless assembly brings together the compressor, ECU, remote and tubing, so installation is mostly about routing and connections. Plan the route for the tubing and wire harness before drilling or fastening anything, and keep both away from exhaust heat, sharp edges and moving suspension parts. Secure the ECU in a dry location where the remote can reach it.
Once the system is wired, test each air spring by raising and lowering it in steps, and watch the air lines for leaks. Because the kit adjusts air springs for different loads, avoid running the compressor for long periods while the vehicle is stationary. Periodically inspect fittings and wiring for chafing, especially where harnesses pass through the frame.
- Route tubing away from heat and edges
- Test each air spring in steps
- Inspect harness for chafing at the frame
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2592 |
| UPC | 767555160961 |
| Compressor | Heavy duty |
| Control | F3 wireless remote with ECU |
| Included parts | Tubing, wire harness, fittings |
Vehicle fitment
Coverage includes 2008–2018 Ford F-150 and Super Duty, Chevrolet Silverado and Tahoe, GMC Sierra and Yukon, Ram trucks, Jeep Wrangler (JK) and Grand Cherokee (WK), and a broad set of other trucks and SUVs.
Vehicles outside the years and models listed are not covered. Check the 2009–2018 Toyota Tundra and Tacoma entries carefully against your year and trim. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes its own tubing, wire harness and fittings, so no separate air lines are described. Route the wire harness away from heat and moving parts, and confirm the ECU is mounted where the remote can reach it.
What’s included
The kit includes the heavy duty compressor, the ECU, the F3 wireless remote, tubing, wire harness and fittings.
Not included: Air springs are not part of this kit.









