Overview
The Pro Comp 314512 is a front ES3000 twin tube cellular gas shock for a 0 to 1 inch lift. It fits 1998 to 2003 Dodge Durango Base, R/T, SLT, SLT Plus, SXT and Sport models.
The shock is 14.71 inches extended and 9.56 inches collapsed, with 5.15 inches of travel. It uses a stem upper mount and a loop lower mount.
Key features
- Front position for a 0 to 1 inch lift
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Stem upper and loop lower mounts
- Limited lifetime warranty
Front height and shock length
A front shock controls how the axle moves over bumps and how the body leans in turns. When the suspension is raised or dropped, the shock’s extended and collapsed lengths must still allow the full range of wheel travel without bottoming out or hitting the frame. Measure the current front height and compare it with the replacement before ordering, because a shock that is too long can strain the mounts and a short one can limit articulation.
Front shocks often wear at the same time as the bushings and ball joints, so a worn bushing can make a new shock feel loose. Inspect the stem mount and the loop end for cracks, and check that the rubber bushings are firm. Replacing both front shocks together keeps the ride even from side to side, and it is a good time to look at the steering linkage.
- Inspect mounts for cracks or elongated holes
- Look for oil seepage on the shock body
- Check bushings before installing the new shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 314512 |
| Series | ES3000 |
| Position | Front |
| Lift | 0 to 1 inch |
| Extended length | 14.71 inches |
| Collapsed length | 9.56 inches |
| Travel | 5.15 inches |
| Upper mount | Stem |
| Lower mount | Loop |
The 314512 is a front ES3000 shock for a 0 to 1 inch lift that fits the 1998 to 2003 Dodge Durango in the Base, R/T, SLT, SLT Plus, SXT and Sport trims. Its 14.71 inch extended length and 9.56 inch collapsed length give 5.15 inches of travel. The stem upper mount and loop lower mount are its connection points, and the shock uses a twin tube cellular gas design with 10-stage velocity sensitive valving. Pro Comp backs the ES3000 with its limited lifetime warranty.
The Durango list covers the first-generation years, so the model year should be checked before the shock is ordered. Pro Comp backs the ES3000 with its limited lifetime warranty.
Vehicle fitment
It fits the 1998 to 2003 Dodge Durango in the Base, R/T, SLT, SLT Plus, SXT and Sport trims.
The list covers the first-generation Durango years only, not the 2004 and later models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front ES3000 shock.






















