Overview
The AirLift Load Controller II is an on-board air compressor control system, part number 25812, that levels a vehicle from side to side. It comes with a new wiring harness and a dual gauge, and it includes a 5 psi low pressure sensor.
It fits a broad range of 2007–2018 trucks, SUVs and cars from makes including Acura, Buick, Cadillac, Chevrolet, Dodge, Ford, GMC, Honda, Jeep, Kia, Lincoln, Mazda, Mitsubishi, Nissan, Ram and Toyota.
Key features
- Levels the vehicle from side to side
- Dual gauge
- 5 psi low pressure sensor
- New wiring harness included for easier and faster installation
- Ready air supply
Side-to-side leveling in use
Side-to-side leveling helps when the load sits to one side, such as a trailer hitch, a heavy toolbox or passengers seated on one side. The controller adds or releases air to bring the vehicle back to level. Watch the dual gauge while loading so you can see how the sides differ before driving.
Gauges and sensors need a clear view and steady connections to work well. Mount the gauges where they can be read from the driver’s seat, and check that the wiring harness is secure and protected from heat. After the first fill, inspect air connections for leaks, since a slow leak can make the system run more often than expected. Keep the compressor clean and free of debris.
- Mount gauges within easy view
- Secure the harness away from heat
- Check connections for leaks after the first fill
Specifications
| Brand | AirLift |
|---|---|
| Part number | 25812 |
| UPC | 729199258121 |
| Function | Side-to-side leveling, on-board compressor control |
| Gauge | Dual gauge |
| Low pressure sensor | 5 psi |
| Warranty | Two year limited |
Vehicle fitment
The manufacturer fitment list covers 2007–2018 Chevrolet Silverado and Suburban, GMC Sierra and Yukon, Ford F-150 and Super Duty, Dodge Ram and Durango, Jeep Wrangler (JK) and Grand Cherokee (WK), Toyota Tacoma, Tundra and 4Runner, and many other models. Each listed year and trim is shown on the Fitment tab.
Some close vehicles are not covered. The Ford Super Duty is listed only for 2008–2017, the Ford Ranger only for 2008–2011 and the Toyota Tundra only for 2008–2012. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included wiring harness is designed to make installation easier and faster. Set the low pressure sensor and both gauges where you can read them while the system runs, and check the air connections for leaks after the first fill.
What’s included
The kit includes the control system, the dual gauge, the 5 psi low pressure sensor and a new wiring harness.
Not included: An air compressor and air springs are not part of this kit.









