Overview
The Pro Comp ES9000 Series front shock absorber, part number 914512, fits 1998 to 2003 Dodge Durango models. It is rated for 0 to 1 in. of lift and uses factory upper and lower mounts. Its extended length is 14.71 in. and its collapsed length is 9.56 in.
The shock is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a nylon-banded piston head. Its valving gives a smooth, comfortable ride on the road and better handling off road.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Shock damping on a Durango
Damping controls how fast the body moves after a bump, so on a Durango the shock affects steering response, body roll and tire contact on both pavement and dirt. Gas-charged twin-tube units keep damping more consistent when they warm up during long drives. Nylon-banded piston heads help the piston seal the cylinder, which keeps the damping force steady across repeated strokes.
A Durango that has been lifted or fitted with heavier tires will load the front shocks differently, and a shock rated for stock or lightly raised use may not suit that setup. Check the front suspension height before ordering, then confirm the shock’s full travel covers the range the truck actually uses. Inspect the factory mounts at each service and replace worn rubber parts before they cause noise or play.
- Look for fluid seepage around the seal
- Listen for knocks at the upper mount
- Check bump stops for cracking
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914512 |
| UPC | 614901696196 |
| Shock series | ES9000 |
| Extended length | Vehicle specific (description gives 14.71 in.) |
| Collapsed length | Vehicle specific (description gives 9.56 in.) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 1 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front-position shock for 1998 to 2003 Dodge Durango models.
The list has no other Dodge models and does not cover the Durango from 2004 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the Durango is rated for only 0 to 1 in. of lift, a lifted truck will need a shock with a different rating. Check the factory mounts and the shock’s full travel before installing.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.









