Overview
The Bilstein 24-185233 is a front shock absorber from the Bilstein 4600 Series, made for the 1997–2003 Dodge Dakota and the 1998–2003 Dodge Durango. It covers the Dakota Base, SLT, SXT and Sport trims and the Durango Base, R/T, SLT, SLT Plus, SXT and Sport trims. It has a gas-charged monotube body, a 2 in diameter and a yellow finish.
Bilstein says its monotube construction carries heat from the fluid out through the outer surface of the body. The dividing piston lets the oil expand as the temperature rises, which the company says keeps foaming and viscosity loss in check. Bilstein adds that the shock holds full damping characteristics under heat.
Because it is a direct-fit part, it is designed to take the place of the original front damper on the listed Dakota and Durango years and trims rather than change the height of the truck. The listed lift height is w/0 in. Lift/Drop.
Key features
- Front position with direct-fit type for the listed Dakota and Durango applications.
- Gas-charged monotube body with a dividing piston.
- Piston head whose compression and rebound damping can be tuned independently.
- Seamless tube made by an extrusion process with consistent wall thickness.
- No external reservoir.
- Boots included with the shock.
Replacing a front damper
A front shock controls how the springs settle after bumps and how the body rocks under braking and steering. When the damper loses control, the front end can bounce on rough pavement, wander in highway grooves and wear tires unevenly. Replacing both front shocks together keeps damping matched on each side, which helps steering feel consistent. Look over the mounts, bushings and dust boots at the same time, since a worn bushing can make a new shock feel loose.
On a truck used for towing or off-road travel, the front damper works hard on washboard roads and steep descents. Keeping tire pressure, alignment and steering components in good condition helps the new shock perform as designed. Check for leaks along the body, damage to the shaft and a clunk when the wheel is turned. Those signs point to a shock that needs attention before it fails outright.
- Inspect the upper and lower mounts for cracks
- Check the dust boot for tears before installation
- Re-check fasteners after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185233 |
| UPC | 651860428826 |
| Shock series | 4600 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop (0 in. lift or drop) |
| Body diameter | 2 in |
| Design | Monotube, gas charged |
| Reservoir | No |
| Finish | Yellow |
| Boots included | Yes |
Vehicle fitment
The manufacturer fitment list covers the 1997–2003 Dodge Dakota in the Base, SLT, SXT and Sport trims, and the 1998–2003 Dodge Durango in the Base, R/T, SLT, SLT Plus, SXT and Sport trims. Confirm your vehicle’s year, model and trim before ordering.
Dakota and Durango model years outside those ranges are not covered. Dodge models outside this set, including later generations, do not fit this shock.
What’s included
Boots are included with the shock. No other parts are listed.









