Overview
The Rancho RS5010 is a rear gas-charged shock absorber in the RS5000 Series, with a lift rating of w/2.5 in. lift. It fits the 1997–2004 Dodge Dakota, the 1998–2003 Dodge Durango, the 1983–1992 Ford Ranger, and the 1994–1996 Mazda B3000 and 1994–1997 Mazda B4000 trucks.
The RS5000 Series is built for light trucks and sport utility vehicles used on road and trail. The RS5010 suits both factory-height and raised suspensions and fits as a direct replacement. Ten-stage velocity sensitive valving and a 1 3/8-in. (35mm) piston define its internal design.
Key features
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Gas-charged body
- Direct fit in the rear position
- Red protective boot included
Matching a shock to lift height
Shock length and damping need to suit the suspension height of the truck. A shock designed around a set lift figure can feel too stiff or too soft when the ride height changes, and a mismatch can also limit how far the suspension travels on uneven trail. Before buying, measure the current height at the front and rear and compare it against the lift rating shown in the specifications.
Dakota, Durango and Ranger owners often replace rear shocks alongside worn leaf spring bushings and bump stops, since a tired bushing can cause the new unit to bind. Gas-charged bodies resist fade during repeated trail use, though a leaking body or a shock that feels soft at speed means it needs replacing.
- Measure ride height before buying
- Inspect spring bushings and bump stops
- Fit a matched pair for even handling
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5010 |
| UPC | 10039703501009 |
| Series | RS5000 Series |
| Position | Rear |
| Charge | Gas charged |
| Valving | Ten-stage, velocity sensitive |
| Piston rod diameter | 5/8 in. (16 mm) |
| Piston diameter | 1 3/8 in. (35 mm) |
| Lift rating | w/2.5 in. lift |
| Fitment type | Direct fit |
| Warranty | Limited lifetime (Rancho) |
| Quantity | Each |
Vehicle fitment
Ford Ranger years from 1993 onward, Dodge Dakota years outside 1997–2004, and Durango years after 2003 fall outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Ford Ranger years from 1993 onward, Dodge Dakota years outside 1997–2004, and Durango years after 2003 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift rating is w/2.5 in. lift, compare it with your truck’s current suspension height before ordering. The RS5010 is a direct-fit rear shock meant to replace the original rear unit on the vehicles above.
What’s included
Supplied: one Rancho RS5010 rear shock with its red protective boot.









