Overview
The Rancho RS999010 is a rear shock absorber from the RS9000XL Series. It fits the 1997–2004 Dodge Dakota, the 1998–2003 Dodge Durango, the 1983–1992 Ford Ranger, and the 1994–1996 Mazda B3000 and 1994–1997 Mazda B4000. It is a gas charged shock with a nine-position manual or remote tuning system and a 2.5 in. lift setting.
Each unit has a 2.75-in. (70mm) body and an 18mm chrome rod, plus a liquid metallic finish, red urethane bushings and a protective boot. Rancho’s limited lifetime warranty applies, and a 90-Day Free Ride Offer is listed alongside it.
Key features
- myRide 9-position manual/remote tuning system
- Gas charged with nitrogen
- 18mm chrome rod diameter
- 2.75-in. (70mm) body diameter
- Red urethane bushings
- Liquid metallic finish
- Protective boot included
Rear shock wear signs
Rear shocks take a lot of load on loaded trips and on washboard roads. Common signs of wear include oil on the body, a bouncy rear end after bumps, cupped tire wear and a rear that feels loose under braking. Rubber bushings can crack with age, which can make a shock noisy and reduce how well it controls the axle.
When choosing a replacement rear shock, check the body diameter, rod size and tuning method against the old unit. Remote tuning systems add a reservoir and hose, so routing needs attention. Replacing a worn rear shock usually makes sense alongside a check of the leaf springs and axle mounts, since those parts carry the same loads.
- Check the body for oil
- Look for cupped rear tire wear
- Inspect bushings for cracks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999010 |
| Shock series | RS9000XL |
| Position | Rear |
| Body diameter | 2.75-in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | myRide 9-position manual/remote |
| Gas charge | Nitrogen gas charged |
| Bushings | Red urethane |
| Finish | Liquid metallic |
| Protective boot | Included |
| Lift height | w/2.5 in. Lift |
| Fitment type | Direct fit |
| Warranty | Limited lifetime warranty; 90-Day Free Ride Offer |
Vehicle fitment
It fits the 1997–2004 Dodge Dakota in the Base, SLT, SLT Plus, SXT, Sport and Sport Plus trims, and the 1998–2003 Dodge Durango in the Base, R/T, SLT, SLT Plus, SXT and Sport trims. It also fits the 1983–1992 Ford Ranger in the Base, Custom, GT, S, S Plus, STX, Sport, XL, XLS and XLT trims, plus the Mazda B3000 Base and B4000 Base, LE and SE trims.
Dodge Dakota and Durango years outside the listed ranges, Ford Ranger years after 1992 and other Mazda models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your truck’s lift matches the 2.5 in. setting before installing the shock. Route it so the bushings sit square and the boot is not pinched against the body or axle.
What’s included
One rear RS9000XL shock absorber with its protective boot and red urethane bushings.













