Overview
The Weigh Safe WS10-2.5 is a 2.5-inch shank adjustable ball mount with a built-in scale for checking tongue weight at the hitch. It is a universal fit, so it is not built for one vehicle. It adjusts from an 11-inch rise to a 10-inch drop in 2-inch increments, and its forged aluminum body keeps the mount light.
The mount is certified to tow up to 14,500 lbs, with a 12,500 lbs max GTW rating when used with the 2-5/16-inch ball. The 2-inch ball is rated 8000 lbs GTW. Both a 2-inch and a 2-5/16-inch stainless steel ball are included, and the finish is polished.
Key features
- Built-in scale reads tongue weight under load
- Adjusts from 11 inch rise to 10 inch drop in 2 inch increments
- Forged aluminum for a lighter mount
- 2.5 inch shank
- Includes 2 inch and 2-5/16 inch stainless steel balls
- Certified to tow up to 14,500 lbs
- V5 and J684 certified
Towing with a larger shank
A 2.5-inch shank is a heavier-duty size than the common 2-inch shank, and it gives the mount more strength where it meets the receiver. The shank size has to match the receiver opening exactly, so measure before buying and avoid forcing a mount that does not seat fully. A snug fit with no side play is what keeps the mount steady on rough roads.
Check the whole hitch setup, not just the mount. The trailer coupler has to match the ball size, and the tow vehicle’s receiver and bumper have to carry the total load. Older receivers and frames can have lower limits than the mount, so confirm the vehicle’s ratings before loading the trailer.
Look over the shank and pin area after each trip. Look for cracks, bent metal near the weld points, and wear that makes the mount rattle in the receiver.
- Measure the receiver opening before buying
- Confirm the receiver and bumper ratings
- Check for side play after each trip
Specifications
| Brand | Weigh Safe Hitches |
|---|---|
| Part number | WS10-2.5 |
| UPC | 653863201598 |
| Shank size | 2.5 inch x 2.5 inch |
| Drop or rise | Adjustable, 11 inch rise to 10 inch drop, 2 inch increments |
| Material | Forged aluminum |
| Ball hole size | Fixed |
| Ball sizes | 2 inch and 2-5/16 inch stainless steel |
| Max GTW | 12,500 lbs with 2-5/16 inch ball; 8000 lbs with 2 inch ball |
| Max tongue weight | 1500 lbs |
| Towing certification | Up to 14,500 lbs |
| Certifications | V5, J684 |
| Finish | Polished |
Vehicle fitment
It is a universal fit, so it is not built for one vehicle. Confirm your receiver takes a 2.5-inch shank and that the trailer and tow vehicle ratings cover the loads above.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tongue weight is read only when the trailer presses on the ball, so measure with the trailer loaded and hitched as it will be towed. Level the trailer by setting the height before you travel.
What’s included
The ball mount with built-in scale, plus 2 inch and 2-5/16 inch stainless steel balls.












