Overview
The Tuff Country 2.5 Inch Leveling Kit with Uni-Ball Upper Control Arms, part number T/C32109, is a front leveling kit for the 2019 and 2020 Ram 1500. It raises the front 2.5 inches using steel strut spacers, and the lift is front only. The kit includes Uni-Ball upper control arms.
The kit is a direct fit with black steel spacers. Its brackets are cut from steel by computerized laser to precise dimensions, so each bracket is made the same. The kit has no bump stops and no shock relocation bracket.
A leveling kit changes the front height, which changes the front suspension geometry and the position of the front axle. Because the kit has no bump stops and no track bar drop, check the existing front components and the track bar angle before driving the truck after installation.
Key features
- 2.5 in. front lift from steel strut spacers
- Uni-Ball upper control arms, as named in the title
- Front lift only; the rear stays at factory height
- Black finish
- No bump stops included
- No track bar drop included
Front-only lifts and what to check
A front-only leveling kit raises the front of a truck to match the rear, which changes the front suspension angles and the position of the front axle. Because the rear stays where it is, the stance will look more even, but the front end geometry shifts. That is the reason to inspect the front parts before a long drive.
Without bump stops, the owner needs to check the existing stops after the front is raised. Inspect the track bar for correct angle and clearance, and look at the ball joints and boots for wear. A front alignment after installation helps set the front wheels straight and reduces early tire wear.
- Inspect bump stops after raising the front
- Check track bar angle and clearance
- Look at ball joints and boots for wear
- Schedule a front alignment after installation
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C32109 |
| Position | Front |
| Front lift height | 2.5 in. |
| Front lift method | Steel strut spacers |
| Rear lift method | Front lift only |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Track bar drop | Not included |
| Finish | Black |
| Fit | Direct fit |
Vehicle fitment
It is a direct fit for 2019 and 2020 Ram 1500 models, including Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman trims.
Ram 1500 model years other than 2019 and 2020, and Ram 2500 and 3500 trucks, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no bump stops are included, check the existing bump stops after the front is raised. Have the front alignment checked once the kit is installed.
What’s included
The 2.5 in. steel strut spacers and the Uni-Ball upper control arms named in the title. Not included: bump stops and a track bar drop.
