Overview
The Tuff Country 22105 is a 2-inch front leveling kit for the 2019–2020 Ford Ranger 4WD. It uses a pair of polyurethane front spacers to raise the front so it sits level with the rear. The spacers are a front-only change, and they are made of polyurethane.
The kit does not require new shocks, so the factory shocks stay in use. The brackets are made from high-quality top grade steel and cut to precise dimensions by a computer-controlled laser, which Tuff Country says means each bracket is the same and fits correctly.
Key features
- 2 inch front leveling
- Pair of polyurethane front spacers
- Laser-cut brackets from top grade steel
- Necessary hardware included
- No new shocks required
- Front only, with no rear components
- Bolt-on installation
- Fits the 2019 Ranger 4WD
Front-only leveling trade-offs
A front-only kit raises the front to match the rear, which changes the stance without touching the rear suspension. The rear keeps its factory height and ride, so loaded or towed trucks may still sit lower in the back. Front-only leveling suits daily use and light trail work, but heavier hauling calls for a different setup.
Polyurethane spacers are a durable material, but over time they can wear under heavy load. Check the spacers and hardware at each service and look for cracks or shifted positions. Because the factory shocks stay in use, watch for leaks and worn mounts on the front end.
- Check spacer position after rough off-road use
- Inspect the front shocks for leaks
- Look for uneven front tire wear
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C22105 |
| Front lift height | 2 inch |
| Lift method | Strut spacers |
| Spacer material | Polyurethane |
| Finish | Black |
| Rear lift | Front lift only |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Bump stops | None |
Vehicle fitment
It fits the 2019–2020 Ford Ranger 4WD in the Lariat, XL and XLT trims.
It does not fit the 2021 and later Ranger. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The spacers mount on the front struts with the included hardware. The shocks stay in place, so the kit is a front-only change. Check the front height after installation.
What’s included
A pair of front spacers and the necessary hardware.
