Overview
The Tuff Country 42206 is a 2-inch leveling kit for the 2020–2026 Jeep Gladiator. It uses polyurethane coil spring spacers to level the front of the Jeep, and Tuff Country says they keep a factory ride without requiring extended shocks.
It fits the Gladiator Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims. The recommended tire size is 37×12.50, and the rim backspacing is standard.
Key features
- Polyurethane coil spring spacers
- Keeps the factory ride
- Simple bolt-on installation
- Lifetime warranty
- Made in the USA
Tires and alignment after leveling
A leveling kit raises the front so the Gladiator sits closer to level with the rear. That change can alter how the tires sit in the wheel wells and how the front suspension angles are set. Tire choice matters here, because a larger tire can rub at full steering lock or under compression if clearance is tight. Check fender clearance and steering travel after installation.
A front alignment is normally needed after a leveling kit, since the height change affects camber and caster. Setting the alignment after installation helps the tires wear evenly and keeps the steering feeling predictable on the highway.
- Check tire clearance at full steering lock
- Set the front alignment after installation
- Recheck fasteners after the first drives
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C42206 |
| Front lift height | 2 inch |
| Spacer material | Polyurethane |
| Recommended tire size | 37×12.50 |
| Rim backspacing | Standard |
| Average install time | 2 to 4 hours |
| Position | Front |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator in its Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The kit is listed only for the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install averages 2 to 4 hours, and new shocks are not required. The spacers bolt on at the front with the factory coil springs in place.









