Overview
The Tuff Country 32106 is a front leveling kit for the 2019–2020 Ram 1500 Rebel. It raises the front of the truck so the front is level with the rear, which allows slightly larger tires and more fender clearance.
The steel spacers mount above the factory coil springs or struts, which keeps the factory ride. Factory shocks can be kept with this kit. The kit is designed for the front only, so the rear keeps its factory height. Measure the front height before and after installation to confirm the lift.
Key features
- Steel strut spacers mounted above the factory coil springs or struts
- Designed to maintain the factory ride
- Factory shocks can be kept
- Allows slightly larger tires and more fender clearance
- Front lift only
Measuring and setting height
Measuring the front height correctly is the first step of any leveling job. Measure from the center of the front wheel to the fender edge, on level ground, with the truck unloaded. Repeat the measurement at the rear, then compare front and rear to see how level the truck sits.
Front height can settle after the first few drives as the new spacers and springs seat. Measure again after a week of normal use, and look at the factory coil springs and struts for signs of sag. Tire pressure and cargo change the reading too, so measure under the same conditions each time.
- Measure with the truck unloaded and tires at proper pressure
- Recheck height after the first week of driving
- Note the readings to compare later
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C32106 |
| Front lift height | 2 to 2.5 inch |
| Lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Unfinished |
| Rear lift method | Front lift only |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Bump stops | None |
Vehicle fitment
The kit is intended for nearly all 4WD Dodge Ram 1500 models, and it fits the 2019–2020 Ram 1500 Rebel. Confirm trim and drivetrain on your truck before buying.
Confirm the trim and drivetrain against the list before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spacers mount above the factory coil springs or struts. Because the kit is designed to keep the factory shock in use, check the front height after installation to confirm the level stance.











