Overview
The Pro Comp PRO-X Twin Tube Shock Absorber (part number 923500B) is a gas-charged twin tube shock with a 23.8 inch extended length, made for lifted trucks and Jeep vehicles. It suits vehicles that spend most of their time on pavement with occasional off-road use.
The shock has a general-purpose twin tube design with 10-stage velocity sensitive valving. The valving adjusts to different road conditions and improves handling, and the 5/8 inch chrome hardened shaft and Teflon rebound stop give a comfortable highway ride.
Key features
- Twin tube design with nitrogen stabilized gas charge
- 10-stage velocity sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened shaft
- Teflon rebound stop
- Black powder coat finish
- Extended length 23.8 in, compressed length 14.32 in
Pressurized shocks and handling
A gas-charged shock uses pressurized nitrogen to keep the oil from foaming during fast movement, which helps the damping stay consistent. Because the charge is under pressure, the shock should be stored and installed with care. Never heat or puncture it, and keep it away from open flame during any repair.
On a Wrangler, the shock works alongside the track bar, control arms and sway bar links, so worn parts in those areas change how the shock feels. Check the bushings and mounts when replacing the shock. Wipe the shaft clean after off-road use to protect the seal, and look for oil on the body during regular inspections. Replace shocks in matching pairs on the same axle.
- Check the mounting hardware for wear
- Inspect for oil seepage at the shaft seal
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 923500B |
| Shock series | PRO-X |
| Type | Twin tube, gas charged |
| Extended length | 23.8 in |
| Compressed length | 14.32 in |
| Travel length | 9.48 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Valving | 10-stage velocity sensitive |
| Finish | Black powder coat |
| Location | Universal |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) with two-door and four-door trims, the 2018 Jeep Wrangler (JL), and the 1997–1999 Mitsubishi Montero and Montero Sport. It is not for the Wrangler (TJ) or for 2019 and later JL models.
The mount style is a loop (eyelet) on this shock, so confirm the mount type on your vehicle before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is nitrogen gas charged and pressurized. Do not open or heat it, and handle it with care during installation.
Check the compressed and extended lengths against your suspension before installing. The shock boot is optional and sold separately.
What’s included
The product is one shock absorber. Each shock is a separate item, and the shock boot is not included.
Not included: Shock boot.









