Overview
The Rubicon Express RE1220 is a set of four U-bolts and nuts for the Jeep Cherokee XJ (1984 to 2001) with a Dana 35 or Dana 44 rear axle. The kit has a 1/2-inch rod, a 2.75-inch inside diameter and a 9.0-inch length.
It fits most Cherokees with Dana 44 and Model 35 rear differentials.
Key features
- Four U-bolts with nuts
- 1/2-inch diameter rod
- 2.75-inch inside diameter
- 9.0-inch length
Signs U-bolts need replacing
U-bolts carry the axle’s clamping load against the leaf springs, so their threads and bends matter. Look for stretched or flattened threads, rust that has eaten into the rod, and nuts that will not hold torque. Any of these signs means the U-bolts should be replaced rather than reused, since a failed clamp can let the axle shift under load.
Retightening after installation is part of the job. New U-bolts and spring seats can settle during the first drives, so check the nuts after the first few trips. Use the torque value in your service manual, and inspect the spring pad and center bolt at the same time.
- Stretched or flattened threads
- Rust pitting on the rod
- Nuts that lose torque repeatedly
- Cracked or worn spring pads
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1220 |
| UPC | 614901437621 |
| Rod diameter | 1/2 inch |
| Inside diameter | 2.75 inches |
| Length | 9.0 inches |
| Included | 4 U-bolts and nuts |
| Sold as | Kit |
Vehicle fitment
It is for the Jeep Cherokee XJ with a Dana 35 or Dana 44 rear axle. It fits most Cherokees with Dana 44 and Model 35 rear differentials.
Confirm your vehicle’s year, model and trim before ordering. Check that your axle housing matches the Dana 35 or Dana 44 used here.
Installation notes
U-bolts hold the leaf springs to the axle, so confirm the inside diameter and length match your spring and axle housing before ordering.
What’s included
Four U-bolts with nuts.







