Overview
The JKHD1 is a front forged track bar with a heavy duty tie rod for the 2007 to 2018 Jeep Wrangler JK, two- and four-door models. It is designed for lift kits from 0 to 6 inch, and the tie rod has forged ends.
A track bar holds the axle centered side to side under the vehicle. This bar is made of heat treated forged steel, designed to resist deflection from oversized tires or extreme side loads. The adjustable sleeved collar sets axle alignment while the bar stays on the vehicle.
The heavy duty tie rod is built from 1.5-inch, .250-wall 4140 chromoly steel tube with forged 1-ton tie drop ends. It works with Dana 30, Dana 44 and Dana 60 axles, and the offset clears larger axle housings and covers.
Key features
- Adjustable sleeved collar for axle alignment without disassembling the suspension.
- High clearance design with clearance through the full suspension cycle.
- OE style bushings for control and handling.
- Offset design clears larger axle housings and covers, including aftermarket differential covers.
- Greaseable, replaceable 1-ton tie rod ends.
- Induction hardened alloy steel (5140) ball studs, 1.250 inch diameter.
- Machined billet aluminum steering stabilizer mount included.
- Can be used with OE wheels and back spacing.
Steering and axle geometry
A track bar and tie rod work together to keep the axle and steering aligned as the suspension moves. A worn bar or loose tie rod end can cause wander, steering play and uneven front tire wear. When replacing these parts, check the steering stabilizer and the drag link at the same time, since a loose part in the steering system can hide a problem in another.
Heavier tires and larger axle housings put more load on the joints, so greaseable ends should be serviced at regular intervals. Check the ball studs for play and the boots for splits. After any change to the bar or tie rod, have the front alignment checked, and recheck the sleeved collar setting after the first trail runs. Keep the grease fittings wiped clean before greasing.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKHD1 |
| UPC | 700008494381 |
| Application | 2007 and newer Jeep Wrangler JK, two- and four-door |
| Position | Front |
| Lift compatibility | 0 to 6 inch lift kits |
| Track bar construction | Heat treated forged steel, 1.5-inch .250-wall 4140 chromoly tube |
| Tie rod ends | Greaseable, replaceable, 1-ton |
| Ball studs | 1.250 inch diameter, induction hardened alloy steel (5140) |
| Bushings | OE style |
| Axle compatibility | Dana 30, Dana 44, Dana 60 |
| Steering stabilizer mount | Machined billet aluminum, included |
Vehicle fitment
The track bar and tie rod fit 2007 to 2018 Jeep Wrangler JK, two- and four-door models. They are the heavy duty set for 07 and newer JK vehicles, with lift clearance from 0 to 6 inch.
Make sure your year, model and trim are covered before buying. This set is designed for the JK, so do not assume it fits the Wrangler TJ, LJ or JL, or the Gladiator.
Installation notes
Set the axle alignment with the adjustable sleeved collar while the bar is installed, which avoids taking the suspension apart. Changing a track bar moves the axle’s side-to-side position, so have the front alignment checked after installation.
What’s included
The set includes the forged track bar with its adjustable sleeved collar, the HD tie rod with forged ends, and the machined billet aluminum steering stabilizer mount.
Not included: The steering stabilizer itself is not part of the set, only its billet aluminum mount.








