Overview
The Dana Spicer Dana 44 Locking Ring, part 36569, fits the front position on Dana 44, GM 10 bolt 8.5 inch and Dana 30 standard axles.
It is a locking ring for the front position. Confirm the exact item against your axle before ordering, because locking rings and spindle nuts are often sold together.
Matching the front axle
Front axle components are matched by axle family, bearing setup and spindle size, so identifying the axle before buying is the most practical step. Check the axle code or gear cover tag, and measure or compare the old part where possible. Mixing axle families is a common cause of parts that look right but do not seat properly.
Locking rings and spindle nuts retain the hub assembly and keep bearing preload in place, so they are usually inspected when the hub is serviced. Look for stripped threads, flattened edges, and any sign the retaining component has shifted. Clean the threads and mating face before reassembly so the component seats fully. Replace it together with the bearings and seals whenever the hub comes apart.
- Confirm the axle family before ordering
- Inspect threads and mating surfaces before reuse
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 36569 |
| UPC | 725975112625 |
| Axle location | Front |
| Axle types | Dana 44, GM 10 bolt 8.5 inch, Dana 30 standard |
Vehicle fitment
Fitment is by front axle type rather than by vehicle, so match the axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One part. Check the package contents against your installation before starting.









