Overview
The Rubicon Express RE9958 is a track bar mount that is a direct fit part.
Confirm fit for your vehicle’s year, model and trim before ordering.
Track bar mount basics
A track bar runs side to side across the axle and keeps it centered under the body. The mount is the point where the bar attaches to the frame or axle bracket, so it carries the lateral load every time the vehicle turns, hits a bump or drifts on uneven ground. Because the mount takes that load, a worn or cracked mount can let the axle shift, which shows up as wandering on the highway or a clunk when steering changes direction.
Look for loose or elongated bolt holes, cracks around welds, and bushings that have split or collapsed. When replacing a mount, tighten the hardware to the torque the fastener requires and recheck it after the first few drives, since bolts can settle once the new part seats. Replace the track bar bushings and bar ends at the same time if they show wear, because a new mount on a worn bar will not hold the axle centered.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9958 |
| UPC | 614901219425 |
| Type | Track bar mount |
Track bar mounts carry the bar’s load into the vehicle structure, so the mount has to line up with the bar and the frame or axle location. Check the position on your vehicle before installation.
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the mount position against your track bar and frame or axle location.
Confirm your vehicle’s year, model and trim before ordering.



