Overview
The Rubicon Express RXT Twin-Tube Shock Absorber, part number RXT2210B, has a 9-inch stroke and upper and lower eyelet mounts. It measures 22.5 inches extended and 13.5 inches collapsed.
The twin-tube design uses a 1.625-inch piston and an 11/16-inch chrome shaft. The body is oversized to hold more fluid, and double welded rings add durability.
Key features
- 1.625-inch piston
- 11/16-inch chrome shaft
- Oversized body with more fluid capacity
- Double welded rings
Eyelet mounts and bushings
Eyelet mounts pivot around a bushing or a bolt, so their condition has a direct effect on how a shock works. A worn bushing lets the eye move side to side, which adds knock and can cause the shock to bind at the end of its stroke. Before fitting a new shock, slide the eyelets over the new bolts and check for free movement without excess play. Eyelet ends also tend to collect grit, so clean them before assembly.
A shock with a 9-inch stroke has less travel than longer units, so clearance checks matter on tight suspension setups. Shorter-stroke shocks can leave less room for error at full compression, so check clearance against the tire and fender liner before installing. Keep the old shock as a reference to compare eye spacing and bushing wear.
- Inspect eyelet bushings for cracks
- Use a bolt that fits the eye bore without slop
- Check fender clearance at full compression
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2210B |
| UPC | 614901453621 |
| Shock series | RXT Twin-Tube |
| Extended length | 22.5 inches |
| Collapsed length | 13.5 inches |
| Stroke | 9 inches |
| Mounts | Upper and lower eyelet |
| Piston | 1.625 inch |
| Shaft | 11/16 inch chrome |
Vehicle fitment
Check the year, model and trim of your vehicle before buying, and confirm your existing mounts are eyelet style.
Installation notes
The shock uses eyelet mounts at both ends, so confirm your existing mounts are eyelet style.











