Overview
The Rubicon Express RXJ907 is a rear 2.5-inch Extreme-Duty monotube shock for the 2020–2026 Jeep Gladiator, sold under the R/ERXJ907 part number. It is built for a 3.5 to 5.5-inch lift and covers the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The shock has a 2.5-inch body with a full bore piston that supports strong damping. The body is 6061-T6 impact-forged aluminum with hard anodizing for durability and lower friction. The aluminum construction also helps keep shock temperatures down.
The shaft is a 3/4-inch OD, chrome-plated 17-4 stainless steel rod. An internal floating piston separates nitrogen gas from oil to improve damping response and reduce cavitation. A redundant seal package protects the shaft, and the valving is tuned to Rubicon Express spring rates to balance ride quality and suspension travel.
The shock is hand made in the USA by Walker Evans. Its eyelet mounts at both ends suit the Gladiator application, and the shock is hydraulic.
Key features
- 2.5-inch body with a full bore piston
- 6061-T6 impact-forged aluminum body, hard anodized
- 3/4-inch OD chrome-plated 17-4 stainless shaft
- Internal floating piston separates nitrogen and oil
- Redundant seal package
- Valving tuned to Rubicon Express spring rates
- Eyelet top and bottom mounts, hydraulic monotube
- Hand made in the USA
Choosing a rear shock setup
A rear shock controls how the axle moves over bumps and during braking and acceleration, so its damping shapes both on-road comfort and off-road control. On a lifted vehicle the shock works at a different angle and travel length than stock, which makes lift height and mount geometry worth checking before you order. Shocks are often replaced in pairs so the rear end rides evenly from side to side.
When comparing options, consider how the shock will be used. A daily driver with occasional trail trips may suit a setup tuned for steady damping, while a vehicle that sees rocky trails benefits from a body and shaft built to handle heat and debris. Bump stops, control arms and the front shocks all affect how the rear performs, so review them alongside the new shock.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ907 (R/ERXJ907) |
| Series | Extreme-Duty Monotube |
| Body diameter | 2.5 inches |
| Position | Rear |
| Lift range | 3.5 to 5.5 inches |
| Body | 6061-T6 impact-forged aluminum, hard anodized |
| Shaft | 3/4-inch OD, 17-4 stainless, chrome plated |
| Top and bottom mount | Eyelet |
| Origin | Hand made in the USA by Walker Evans |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2020–2026 Jeep Gladiator, including the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
Jeep Wrangler models and other Gladiator years fall outside this application. Match your year, model and trim to the list before ordering.
What’s included
One rear shock absorber.

















