Overview
The Rancho RS999006 is a rear shock absorber from the RS9000XL Series for the 1995–2004 Toyota Tacoma (Base, S-Runner). It is a gas charged shock with a remote reservoir and nine-position adjustable damping for compression and rebound, built for performance light trucks used on and off road.
The 2.75-in. (70mm) body and large 18mm Nitro Carb rod follow the RS9000XL Series design. It is a direct fit with no lift or drop (w/0 in. Lift/Drop), so it works as a replacement shock. Damping can be changed across nine positions without swapping shocks, and the unit carries a limited lifetime warranty.
Key features
- Nine-position tuning technology for adjustable compression and rebound damping
- Gas charged remote reservoir in anodized aluminum, connected by a stainless steel braided hose
- Large 18mm Nitro Carb rod
- 2.75-in. (70mm) body diameter
- Liquid metallic finish
- Polyurethane bushings
- Protective boot included
Remote reservoir routing
A remote reservoir keeps the gas chamber away from the shock body, which helps manage heat on long runs. Routing matters, because a hose that rubs on a tire, a bracket or the exhaust can wear through quickly. Leave slack in the hose so it does not pull tight at full compression or full rebound, and use the mounting points to keep it clear of moving parts.
Check the reservoir mount after the first few drives, since vibration can loosen it. Braided hose fittings should be inspected for kinks and seepage at the ends. If you change tires or add a larger wheel, recheck clearance around the reservoir, because a new tire can change how close the hose sits to the body.
- Recheck hose clearance after tire changes
- Inspect fittings for seepage
- Keep the boot in place around the rod
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999006 |
| UPC | 10039703090060 |
| Shock series | RS9000XL |
| Position | Rear |
| Body diameter | 2.75-in. (70mm) |
| Rod | 18mm Nitro Carb rod |
| Tuning | 9-position tuning technology |
| Gas charge | Nitrogen gas charged |
| Reservoir | Remote, anodized aluminum |
| Hose | High pressure stainless steel braided hose |
| Finish | Liquid metallic |
| Bushings | Polyurethane |
| Protective boot | Included |
| Lift height | w/0 in. Lift/Drop |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in the Base and S-Runner trims. Later Tacoma generations and other Toyota models fall outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the remote reservoir and its braided hose clear of moving suspension parts, tires and exhaust heat when routing them, and check that the hose will not rub at full travel. The protective boot should stay in place around the rod to keep dirt and grit off the rod surface.
What’s included
One rear RS9000XL shock absorber with its protective boot.














