Overview
The Bilstein 4600 Series Shock Absorber, part number 24-009232, is a front gas charged monotube shock with a 2 in. body diameter. Confirm year, make, model and trim before ordering, since the correct match depends on your vehicle.
Bilstein’s patented monotube gas charged design lets heat from the oil transfer to the outer surface of the shock body, which dissipates heat more efficiently. The dividing piston lets the oil expand as heat builds, which prevents aeration (foaming) and viscosity loss, so the shock keeps its full damping characteristics as temperatures rise.
The tube is made by a special extrusion method for tight peak-to-valley tolerance and consistent wall thickness. The seamless monotube supports tube strength and shock life, and the digressive design uses fewer parts than most conventional twin tube and road sensing shocks.
Key features
- Patented monotube gas charged design
- Dividing piston lets oil expand as heat builds, limiting aeration and viscosity loss
- Extruded tube with tight peak-to-valley tolerance and consistent wall thickness
- Seamless monotube design for tube strength and shock life
- Piston head allows independent tuning of compression and rebound damping
- Fewer parts than most conventional twin tube designs
- Boots included
- Yellow finish
Front shock checks
Front shocks control the bounce of the front end and help keep the tires in contact with the road during braking and turning. A worn front shock often shows up as a floating feel after bumps or a tendency for the front to dip under braking. Monotube gas charged designs keep damping more consistent, but the eye mounts, bushings and boot still wear with use and deserve regular checks.
When a front shock comes off for service, look at the body, the seals and the boot first. Oil on the body is a common sign of seal wear. Clean any corrosion from the mounting points before the new shock is fitted, and confirm the position matches the side and axle it replaces so the new unit works with the rest of the front end.
- Look for oil on the shock body
- Check eye mount bushings for wear
- Inspect the boot for tears
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-009232 |
| UPC | 651860460079 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Position | Front |
| Body diameter | 2 in. |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct Fit |
Vehicle fitment
This shock is a Direct Fit design with a 0 in. lift or drop. Because it is a front shock, match the mounting position to the front of your vehicle, and confirm year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included with the shock. The shock has no reservoir.
Not included: Mounting hardware is not part of the package, so check what you have before installing.









