Overview
The RE1467 is a 4 degree steel pinion shim for leaf spring axles, sized for springs 2.5 inches wide. It can be used at the front or rear of the vehicle.
Rubicon Express designs this shim to stay locked into the spring pack rather than float between the pack and the spring perch.
Key features
- 4 degree angle
- Solid steel for trail durability
- Fits 2.5 inch wide springs
- Usable at the front or rear for pinion angle
- Sold in pairs
Setting pinion angle with shims
A pinion angle shim changes the angle of the rear axle housing relative to the driveshaft on a leaf spring vehicle. Correct pinion angle keeps the u-joints working within their range, which reduces vibration at highway speeds and wear on the joints over time. Shims are usually installed in pairs so the axle stays square and the spring stays level.
When choosing a shim, the spring width matters more than anything else. Measure the spring at its widest point and compare it to the shim before buying, because a shim that is too narrow will not sit correctly in the pack. Pinion angle also depends on ride height, so a lift or a new spring rate may call for a different angle. Recheck the angle after any suspension change and after the first few trail runs.
- Measure spring width before buying
- Check pinion angle after any lift or spring change
- Replace worn u-joints if vibration continues
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1467 |
| UPC | 614901438383 |
| Angle | 4 degree |
| Spring width | 2.5 inch wide springs only |
| Material | Steel |
| Center pins | Not included |
| Design | Universal design |
| Quantity | Pairs |
Vehicle fitment
It is a universal design sized for 2.5 inch wide springs. Measure the spring width before ordering.
Installation notes
The shim is meant to sit within the spring pack together with a center pin. The pins are not included, so they need to be bought separately.
What’s included
A pair of shims. Center pins are not included.





