Overview
The Pro Comp degree shim 99-600, part number 99-600, is a 6 degree tapered shim sold as a single piece. Pro Comp Suspension designs it to improve the vehicle’s driveshaft angle, and it is listed without center pins.
The shim is tapered, which sets its correction angle across its length. The UPC for this part is 614901133424.
Key features
- 6 degree tapered design
- Sold as a single shim
- Without center pins
- Designed to improve driveshaft angle
Larger Corrections and Driveline Checks
A larger shim angle corrects more error, but it also moves the driveline further from its original position. That makes precise measurement more important, since an overcorrected angle can create vibration as well. Taking readings before the work gives a baseline to compare against.
Single shims can be easier to handle than pairs when only one side of the spring pack needs correction. The shim should sit flat against the spring seat, and the axle should be checked for square after it is tightened. Keep the old parts until the setup has been driven and checked.
- Measure the angle at the front and rear of the driveshaft
- Check that the shim sits flat against the seat
- Recheck after the first several drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-600 |
| UPC | 614901133424 |
| Degree | 6 degree |
| Quantity | Single |
| Center pins | Without center pins |
Vehicle fitment
No vehicle is named for this shim. A 6 degree correction is a larger angle, so measure the driveline before choosing it.
Installation notes
Orient the taper to correct the measured angle, and check the pinion angle after the shim is fitted. Confirm the fasteners are tightened to the specification for your axle.
What’s included
The package is a single shim, without center pins.










