Overview
The Pro Comp Suspension 90101 is an alloy aluminum degree shim that helps align driveline angles when lifted springs are used. It fits the 2018 Jeep Wrangler JK in the Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara and Unlimited Sport trims.
Pro Comp says degree shims are constructed of alloy aluminum, and this one is intended for use with Pro Comp part numbers 33211, 33311 and 53111. It is supplied in bulk.
Pro Comp’s own fitment label for the shim is universal fit, while its manufacturer fitment list names only the 2018 Wrangler JK. When a vehicle sits higher on lifted springs, the angle between the axle and driveshaft changes, and a degree shim is one way to bring it back in line.
Key features
- Degree shim made of alloy aluminum
- Helps align driveline angles with lifted springs
- For use with part numbers 33211, 33311 and 53111
- Supplied in bulk
- Fits the 2018 Jeep Wrangler JK
Driveline angle basics
A lifted vehicle changes the angle between the axle and driveshaft, and that angle affects vibration and wear in the universal joints. A degree shim adjusts the axle side of the mount to bring the angle closer to the correct range. It is one part of a driveline setup and is not a complete fix on its own.
Before installing, check the driveline angle with an inclinometer at both ends, and confirm the shim fits the mount as intended. Shims must be used with the matching lift components. Tighten fasteners to specification and re-check after the first drive.
Signs of a driveline problem include vibration at highway speed, clicking on turns and wear on the u-joints. Inspect the joints and pinion seal whenever the shim is changed.
- Measure angles before and after installation
- Inspect u-joints during each service
- Re-torque mounts after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 90101 |
| UPC | 614901118698 |
| Part type | Degree shim |
| Material | Alloy aluminum |
| Use | Aligning driveline angles when lifted springs are used |
| Used with | Part numbers 33211, 33311 and 53111 |
| Packaging | Bulk |
| Pro Comp fitment label | Universal fit |
Vehicle fitment
The 2018 Jeep Wrangler (JK) is covered in these trims:
- 2018 Jeep Wrangler (JK) (Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport)
Only the 2018 Wrangler JK is covered. Earlier Wrangler JK years and other models are outside this shim’s coverage. It works with Pro Comp part numbers 33211, 33311 and 53111. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp says to use the 90101 shim with part numbers 33211, 33311 and 53111, so it is not a standalone kit. Its job is to help align driveline angles when lifted springs are used.






