Overview
The Skyjacker 1032H is a front camber/caster shim with a 0 to 2.75 degree range. It fits the 1980–1996 Ford Bronco, 1980–1996 Ford F-150 and 1980–1985 Ford F-350.
Camber and caster are front alignment angles. A shim between the axle and the spring or mount offers one way to adjust them after a lift, and it works as an alignment aid across a broad range of fits.
With a 0 to 2.75 degree range, the 1032H gives a little more adjustment than a 2 degree shim, which suits the older full-size Ford trucks it fits.
Key features
- Camber/caster shim
- 0 to 2.75 degree adjustment range
- Front position
- Alignment aid for a broad fit
- Fits Bronco, F-150 and F-350 models
- Direct-fit
Full-size Ford front ends
The full-size Bronco and F-150 front ends of this era use a solid axle with leaf springs, so alignment angles change as the axle is raised or the springs are replaced. A camber/caster shim gives a way to bring those angles back toward specification without rebuilding the front end. A shim changes the geometry more than a small adjustment would, so plan on a full alignment.
Before installing, check the spring pins, shackles and bushings, since worn parts can cause alignment to drift quickly. Older trucks often have rust in mounting areas, so look for corrosion at the axle seats and brackets. Once the shim is in, have the alignment checked and inspect tires for uneven edge wear over the next few drives.
- Check spring pins and shackles
- Look for rust at mounting areas
- Have the alignment rechecked
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 1032H |
| UPC | 803696100289 |
| Part type | Camber/caster shim |
| Adjustment range | 0 – 2.75 degrees |
| Position | Front |
| Fitment type | Direct fit |
| Category | Axle parts, leaf spring axle shim |
Vehicle fitment
It fits these vehicles, with the trims shown:
- 1980–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport)
- 1980–1996 Ford F-150 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
- 1980–1985 Ford F-350 (Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat)
It covers the full-size Bronco and F-150 from 1980 to 1996 and the F-350 from 1980 to 1985. The Bronco II, Explorer and Ranger are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Skyjacker positions the shim as an alignment aid for final settings. Expect to have the alignment checked after fitting it.





