Overview
The Pro Comp Degree Shim, part number 90103, is an alloy aluminum shim designed to help align driveline angles when lifted springs are used.
The shim is constructed of alloy aluminum and helps align driveline angles when lifted springs are used. It is a universal-fit part, but suspension shims depend on the axle and spring setup, so confirm the angle and fit for your vehicle before installing.
Key features
- Constructed of alloy aluminum
- Designed to help align driveline angles when lifted springs are used
- Universal fit type
Before fitting a shim
A degree shim changes the mounting angle of the axle, which can help when lifted springs have moved the driveline out of its original geometry. Because the correction depends on your specific axle and spring setup, the right angle has to be measured rather than assumed. Driveline vibration is a common sign that the angle is off.
Before fitting, measure the existing angle at the pinion and transfer case, then compare it with your target. Confirm the shim seats fully against the mounting surface and that the bolts are secured with the correct hardware. Check that the driveshaft clears the transmission crossmember and floor pan through full travel.
After installation, take a road test to listen for vibration and check the u-joints after the first trail trip.
- Measure the angle before choosing a shim
- Seat the shim fully against the mount
- Recheck clearances after articulation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP90103 (90103) |
| UPC | 614901118711 |
| Product type | Degree shim |
| Material | Alloy aluminum |
| Purpose | Align driveline angles with lifted springs |
| Fitment type listed | Universal fit |
Vehicle fitment
No specific vehicle is named for this shim. Confirm the shim angle and axle fit for your vehicle before ordering.
Do not assume this shim fits a specific axle or spring setup. Verify the year, model and trim of your own vehicle prior to purchase.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is recommended. Support the vehicle on rated jack stands, never on a jack alone. Tighten all fasteners to the torque values for your vehicle. Re-check fasteners after the first miles of driving and again after off-road use. Have the alignment checked after any suspension or steering work, and check that brake lines, hoses and wiring have full clearance through suspension travel.
What’s included
Alloy aluminum degree shim, part number 90103.








