Overview
The Pro Comp 99-600B is a 6 degree alloy aluminum degree shim. Pro Comp designs it to help align driveline angles when lifted springs are used, and it is classed as a leaf spring axle shim.
A degree shim sits between the spring and the axle to change the pinion angle, which is how it corrects a driveline angle that a lift has altered. Pro Comp supplies this version without center pins, so the shim must be located by the spring and axle arrangement you already have.
Key features
- 6 degree angle
- Alloy aluminum construction
- Designed for driveline angle alignment with lifted springs
- Leaf spring axle shim
Choosing a degree shim
A degree shim is one way to bring the pinion angle back in line after a lift has changed the driveline geometry. It only addresses the angle at the axle, so it works alongside the spring and axle setup already on the vehicle rather than replacing any part of it.
Before buying a shim of this type, measure the pinion angle and the transmission or transfer case output angle with the vehicle at its installed ride height. Note whether the vibration appears under acceleration, on deceleration, or at a steady cruise. Shims are often installed with new u-joints or a driveshaft that has been shortened or replaced, so inspect those parts before fitting the shim.
- Check U-joint wear and driveshaft condition
- Inspect spring pads and axle seats for damage
- Recheck driveline angles after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-600B |
| UPC | 61490117016 |
| Degree | 6 degree |
| Material | Alloy aluminum |
| Center pins | Without center pins |
| Application | Leaf spring axle, lifted springs |
Vehicle fitment
No vehicle is named for this shim. Its use depends on your spring and axle arrangement, not on a model year.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this version has no center pins, check how your axle and spring pad locate the shim before installing it. A degree shim only corrects the driveline angle when lifted springs are in use.
What’s included
One 6 degree degree shim.
Not included: Center pins, which this version is sold without.












