Overview
The Pro Comp degree shim 99-200B, part number 99-200B, is a 2 degree alloy aluminum shim. Pro Comp Suspension designs it to help align driveline angles when lifted springs are used, and it is listed without center pins.
A 2 degree shim is the smallest correction in this group, so it suits trucks with a modest change in driveline angle. The UPC for this part is 614901170108.
Key features
- 2 degree angle
- Alloy aluminum construction
- Without center pins
- Designed for lifted leaf spring setups
Lifted springs and driveline angle
Lifting a truck with springs changes the angle between the transmission output and the pinion. Over time that angle can drift, so a shim helps bring the driveline back into a workable range. A small correction like this suits trucks with a modest change in angle, while larger changes may need a different approach.
Before adding a shim, check the springs, axle pinion and U-joints for wear. Fresh bushings and new U-joints give a more consistent reading, and replacing worn parts together helps the setup last.
Alloy aluminum keeps the shim light, which helps when the driveline is already under extra load from a lift. Keep the mounting hardware clean and check it at each service so the shim stays seated.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-200B |
| UPC | 614901170108 |
| Degree | 2 degree |
| Center pins | Without center pins |
| Material | Alloy aluminum |
Vehicle fitment
No vehicle is named for this shim. Measure the driveline angle on the truck first, because a 2 degree correction only addresses a small error.
Installation notes
Install the shim between the spring and axle as directed by the lift setup, then check the driveline angle. Confirm all fasteners are torqued to the specification for your axle.
What’s included
The package is the shim alone, without center pins.












