Select your vehicle
-13%

Rubicon Express Degree Shim 2.5 Inch Wide X 2 Degree Aluminum – RE1465

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2-degree aluminum axle shim
  • Fits 2.5-inch wide springs
  • Sold as a pair; center pins not included
  • Sets pinion angle front or rear

Description

Overview

The Rubicon Express RE1465 is a 2-degree aluminum axle shim for leaf springs that are 2.5 inches wide. The shims can be used at the front or the rear to set pinion angle. They are sold as a pair, and the center pins are not included.

It is a universal design, and its only sizing reference is the 2.5-inch spring width.

Key features

  • 2-degree pinion angle shim
  • Aluminum construction
  • Fits 2.5-inch wide springs
  • Usable front or rear
  • Universal design

Choosing the right setup

A pinion angle shim changes the angle at which the pinion sits relative to the driveshaft. On a lifted leaf spring vehicle, the axle can rotate under acceleration and braking, so the pinion angle can drift from its intended setting. Correcting it helps reduce driveline vibration and wear on the U-joints. The right shim depends on how far the pinion sits out of alignment, so measure the existing angle before choosing one.

Pinion angle shims sit between the leaf spring and the axle seat, so the spring pins and U-bolts should be inspected whenever a shim is changed. Retighten the U-bolts after the first few drives, since the spring can settle. Replacing worn U-joints at the same time keeps the driveline working as intended after the correction.

  • Measure pinion angle at the driveshaft with the vehicle at normal ride height
  • Inspect U-joints for play before adjusting the angle
  • Check U-bolt tightness after the first few drives

Specifications

Brand Rubicon Express
Part number RE1465
UPC 614901438369
Angle 2 degrees
Material Aluminum
Spring width 2.5 inches
Center pins Not included
Sold as A pair

Vehicle fitment

It is a universal design sized for 2.5-inch springs. Confirm the spring width on your vehicle before ordering, since the shim is sized for 2.5-inch springs only.

Installation notes

The center pins are not included, so the pins must be sourced separately for the spring seat. Measure the pinion angle before and after installation to confirm the 2-degree change.

What’s included

A pair of 2-degree aluminum shims.

Not included: center pins.

SKU: R/ERE1465 Category:

Specification

Shipping weight 0.55 lbs
Package dimensions 5.00 × 2.40 × 0.60 in
brands

Questions & Answers

Does the RE1465 fit my springs?

It is sized for 2.5-inch wide springs only. Measure the spring width on your vehicle before ordering, since a different width will not match the shim.

Are center pins included?

No. The center pins are not included, so they need to be sourced separately. Check the pin size that fits your spring seat before ordering the shims.

Is it sold as a pair?

Yes. The 2-degree shims are sold as a pair, and they can be used at the front or the rear to set pinion angle. Check the pinion angle after installation to confirm the change.

How can you tell if a pinion angle shim is needed?

Look for driveline vibration under acceleration or U-joints that wear early. Measuring the pinion angle against the driveshaft angle shows whether the offset is outside the normal range for your lift.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon