Select your vehicle

Rubicon Express Control Arm Bushing Sleeve – RM10190

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Control arm bushing sleeve for upper control arms
  • Steel sleeve for a small Superride bushing with a 10mm ID
  • Requires 2 per bushing

Description

Overview

The Rubicon Express RM10190 is an upper control arm bushing sleeve, made from steel. It is designed for upper control arms that use a small Superride bushing with a 10mm inside diameter sleeve.

Two sleeves are needed for each bushing, so count the bushings on the arms before ordering.

Key features

  • Upper control arm bushing sleeve
  • Made from steel
  • Sized for a small Superride bushing with a 10mm ID sleeve

Sleeve sizing and bushing wear

A bushing sleeve supports the bushing inside the control arm, so it needs to match the bushing’s inside diameter. A sleeve that is too loose can let the bushing spin, and one that is too tight can crack the arm or make installation difficult. Because two sleeves go into each bushing, count the bushings on the arms before buying.

Bushings wear over time from road grit and articulation. Replacing worn bushings together with the sleeves keeps the arm centered and reduces rattle at the joint. When you replace the sleeves, clean the bore and check it for damage before pressing parts in.

  • Measure bushing inside diameter with calipers
  • Check both ends of the control arm
  • Replace worn bushings with matched parts

Specifications

Brand Rubicon Express
Part number RM10190
UPC 614901444711
Material Steel
Position Upper
Bushing Small Superride, 10mm ID sleeve
Quantity per bushing 2

Vehicle fitment

Fit depends on the sleeve dimensions rather than a model name. Match it to the arm and bushing sizes on your vehicle before ordering.

Measure the bushing and sleeve inside diameter before ordering. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The sleeve fits inside the bushing, so the bushing must be the small Superride size.

What’s included

A steel bushing sleeve. Two are needed per bushing.

SKU: R/ERM10190 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 8.00 × 4.00 × 2.00 in
brands

Questions & Answers

How many sleeves do I need per bushing?

Two. Each upper control arm bushing takes two of these sleeves, so order two sleeves for each bushing you plan to replace. Count the bushings on the arms before ordering.

What bushing does it fit?

It is for a small Superride bushing with a 10mm ID sleeve, used in upper control arms. Measure the bushing before ordering to confirm the inside diameter matches.

Is it made of steel?

Yes. It is made from steel and is designed for a small Superride bushing with a 10mm ID sleeve. Check the bushing size before fitting it, since the sleeve must sit inside the bushing.

Should I replace the bushings when fitting sleeves?

Inspect the bushings first. Look for cracked rubber, torn seals or play at the arm. Worn bushings should be replaced along with the sleeves so the arm stays properly located.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon